●Use Requested Tray: Indicates if the device will automatically try to load media from the next input media tray in the auto-select sequence (defined by each device) when it cannot load media from the current tray.

●Manual feed prompt: Lets you specify whether Manual Feed Prompt will be displayed always, or only if the tray is not loaded.

●Size/Type prompt: Lets you specify what the control panel displays when a paper tray is opened and closed. Configure it to display or not display the message To change size or type press check on the control panel. In either case, HP Web Jetadmin displays a Tray empty message on the Device Status page.

●Use another tray: When set to Enabled, this gives the user the ability to select another tray from which paper could be provided for the job. When set to Disabled, the user is forced to provide paper through the same tray, after the paper mount message is posted.

4.Duplex Blank Pages: Enables or disables smart duplexing.

System Setup Ram Disk

Use this option to turn off RAM Disk functionality or to set it to automatic. If Auto, a RAM disk is created whose size is determined by the printer as a percentage of the amount of installed memory.

To configure this option, select Off or Auto.

Time Zone

Use this option to specify the Greenwich Mean Time (GMT) by selecting the time zone the device is in and specify whether the clock for the device is automatically adjusted for daylight saving time (summer time).

Following are steps to configure this option:

1.Specify the time zone for the device by selecting a value from the drop-down list.

2.To enable daylight saving time, select the Automatically adjust clock for daylight saving changes option.

To disable daylight saving time, clear the Automatically adjust clock for daylight saving changes option.

Time Zone/Daylight Saving

Use this option to specify the Greenwich Mean Time (GMT) by indicating which time zone the device is located in and whether the clock on the device is automatically adjusted for daylight saving time. You can also use this option to set the real time clock to the local time on the device. The device uses the real time clock to adjust the weekly timer mode, wake up at a particular time, enable time stamps on email alerts, and record internal event times. This feature provides the maximum flexibility for time configuration and management. When used with the local time on the device, the Time zone settings and Daylight saving settings options help indicate the GMT time. You can also use this option to specify the date range for daylight saving time, which should match the daylight saving time schedule for the location of the device.

Following are steps to configure this option:

1.Select the time zone for the device from the Time zone drop-down list.

2.To enable the daylight saving setting, select the Automatically adjust clock for daylight saving time (DST) checkbox.

3.To specify the start date and end date for daylight saving time, perform the following steps:

324 Chapter 6 Device Configuration Options

ENWW