NOTE: The resolution setting cannot be changed by the user.

To configure this option, select the quality of outbound faxes from the Resolution drop-down list.

Fax Ring Burst Off Time

Use this option to specify a the amount of time between rings that must elapse before the modem can detect an incoming ring (or, Ring Burst Off Time). You may want to specify a custom value for Ring Burst Off Time if you use the fax line for multiple purposes and only want the fax answering for a specific ring duration.

To configure this option, select Enable Custom Ring Burst Off Time and then type the value in milliseconds in Ring Burst Off Time.

Fax Ring Frequency

Use this option to specify a particular frequency for the fax ring. You may need to specify a custom value in order to fix oscillations generated by a custom PBX policy. This option might be required by technical support to adjust the fax ring communication.

NOTE: Change this setting only when directed by an HP technical support agent.

To configure this option, select Enable custom ring frequency and then type a numeric value.

Fax Send

This option lets you specify the most efficient settings for sending faxes from the digital send device. These settings affect how the device dials outbound faxes and how it behaves when the receiving line fails to answer the fax. These settings will ensure that the majority of the outbound faxes are received successfully while minimizing time spent attempting to send faxes to unreachable recipients.

Following are steps to configure this option:

1.Select the dialing mode from the Dialing mode drop-down list.

2.To have the fax wait for a dial tone before dialing for an outbound fax document, select Yes from the Detect dial tone drop-down list.

3.Select the number of retry attempts when the receiving line is busy from the Redial on busy drop-down list.

4.Select the number of retry attempts when the receiving line fails to answer from the Redial on no answer drop-down list.

5.Select the number of minutes to wait between retry attempts from the Redial interval drop-down list.

Fax Send - Dialing Mode

This option lets you sets the default dialing mode for dialing a number on a fax send (Tone or Pulse). This lets you select the dialing mode that suits the characteristics of the available communication line.

To configure this option, select the radio button for the dialing mode.

Fax Send - Other Options or Other Settings

This option lets you define what the device should do if the number dialed is busy or there is no answer.

ENWW

Device Configuration Options for Fax 389