TCF Settings

Use this option to optimize fax performance by fine tuning the fax ring frequency and TCF signals to best suit the needs of your organization. If your fax device is having trouble sending outbound faxes, increasing the TCF delay and extending the TCF signal may improve communication with difficult fax receivers. TCF is a series of zeros sent to the receiver to confirm that the connection is working and to establish the optimal connection speed. The sending fax generates a series of TCF signals at different speeds until it receives a Confirmation To Receive (CFR) signal from the receiving fax. TCF T.30 delay specifies how long to wait before sending each TCF signal. TCF extend specifies how long to extend the TCF signal beyond the default time length (1500 milliseconds).

Following are steps to configure this option:

NOTE: By default, TCF T.30 delay and TCF extend values are set to the manufacturer's default.

1.To specify a custom TCF delay value, check the box next to Enable custom TCF T.30 delay and then type the length for the delay in TCF T.30 delay. The value can be from 60 milliseconds to 255 milliseconds.

2.To specify a custom TCF extend value, check the box next to Enable custom TCF extend and then type the length for the extend in TCF extend. The value can be from 0 milliseconds to 2550 milliseconds.

Device Configuration Options for Embedded Web Server

●Embedded Web Server Configuration Options

●Embedded Web Server Language Settings

●Embedded Web Server Mail Settings

●Embedded Web Server Other Links

●Embedded Web Server URL

●Time Services

Configuration options for Embedded Web Server define functions for the device’s Embedded Web Server.

Embedded Web Server Configuration Options

This option lets you select various features for the embedded Web server. If you have a set of standard configuration options for embedded Web servers, you can direct all of your embedded Web servers to the URL of the printer that has the correct configuration options. This eliminates the need to manually specify the configuration options for each embedded Web server, reducing errors.

To turn a feature on, select the feature check box. To turn a feature off, clear the feature check box.

Embedded Web Server Language Settings

Use this option to specify what language the embedded Web server uses to display Web pages. Following are steps to configure this option:

NOTE: If you want to receive HP Web Jetadmin alerts, you must use English or the browser language. To do this, set the Select a language to English and then specify the language in your browser to the language you need to use. Then select the View pages in browser language option.

ENWW

Device Configuration Options for Embedded Web Server 399