●On: Calibration occurs immediately following boot.

●Off: Calibration never occurs.

●Delayed: Calibration never occurs; for the delay interval. Setting this option to Delayed controls when a calibration occurs in relation to a power on event.

To configure this setting, select Off, On, or Delayed.

Print PDF Errors

You can choose to have a PDF error page print, which shows the error encountered and the stack at the time of the error. This is useful for debugging.

To configure this option, select On to print an error page or Off to not print an error page.

Print PS Errors

You can choose to have a PostScript error page print, which shows the error encountered and the stack at the time of the error. This is useful for debugging.

To configure this option, select On to print an error page or Off to not print an error page.

Printer Wakeup

Use this option to send a notification to the device that takes the device out of Sleep mode. When you enable this option and click Apply, the notification is sent immediately.

PS Defer Media

If the device uses non-HP PostScript drivers instead of HP drivers to print jobs, use this option to enable or disable the HP paper-handling model. Non-HP PostScript drivers do not recognize all the tray configurations and either print from a non-specified tray or do not print at all. The HP paper-handling model always prints jobs.

If the Enabled option is selected, non-HP PostScript drivers use the HP tray-selection method. This is the default.

If the Disabled option is selected, non-HP PostScript drivers use the non-HP PostScript tray-selection method.

Quick Sets

Quick Sets are shortcut jobs with predefined settings that help users complete their jobs quickly and reliably. Users can access Quick Sets on the device control panel from the Home screen or the Quick Sets application.

Use this option to create Quick Sets for Copy, Email, Fax, Save to Network Folder, Save to USB, and Save to SharePoint® jobs. Quick Sets are saved as unique jobs and do not impact the defaults that are set for the device.

Following are steps to configure this option:

1.If you are configuring multiple devices or creating a device configuration template, select one of the following options:

316 Chapter 6 Device Configuration Options

ENWW