value in the device lists. If HP Web Jetadmin cannot obtain a value from the device, it displays <Unknown> in the device lists.
The predefined thresholds are based on the stability of the value for each column. For example, the Severity column is considered
NOTE: If you use HP Web Jetadmin to update the System Contact value for a device, the
Follow these steps:
1.On the top menu bar, access Tools > Options > Device Management > Device Polling > Background
2.Configure the desired settings:
●Polling interval: Specify the number of seconds during which HP Web Jetadmin sends device requests to the network. The default is 2.
●Time between polling intervals: Specify the number of seconds that HP Web Jetadmin remains idle between polling intervals. The default is 10.
●Number of devices per poll: Specify the number of devices that HP Web Jetadmin can query concurrently. The default is 2.
HP Web Jetadmin sends device requests for the specified number of devices to the network in a poll burst and waits for the responses. When HP Web Jetadmin receives the response packets, it sends another burst of device requests. HP Web Jetadmin continues to send device requests until the specified polling interval expires, and then waits until the specified number of devices per poll is satisfied before sending new device requests.
3.Click the Apply button.
To reset all of the values to the defaults, click the Reset to Default Values button.
Configure the Polling Options for Device Lists
Device List polling polls devices that are in view across all clients. The information polled from the device varies based on what columns the clients are viewing in the Device List.
Follow these steps:
1.On the top menu bar, access Tools > Options > Device Management > Device Polling > Device List.
2.Configure the desired settings:
●Polling interval: Specify the number of seconds during which HP Web Jetadmin sends device requests to the network. The default is 5.
●Time between polling intervals: Specify the number of seconds that HP Web Jetadmin remains idle between polling intervals. The default is 7.
●Number of devices per poll: Specify the number of devices that HP Web Jetadmin can query concurrently. The default is 2.
HP Web Jetadmin sends device requests for the specified number of devices to the network in a poll burst and waits for the responses. When HP Web Jetadmin receives the response packets, it
ENWW | Device Management Configuration Options 53 |