Desa CGN12 installation manual To Select Heating Level, Burner Patterns

Page 14

14

TO SELECT HEATING LEVEL

!WARNING

When running heater, set control knob at LOW or HIGH locked positions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monoxide may result.

!CAUTION

Do not try to adjust heating levels by using the manual shutoff valve.

1. Slightly press in control knob and turn counterclockwise

C-clockwise

to the LOW

 

or HIGH positions.

 

 

IMPORTANT: Release downward pressure while turning control knob. Control knob will lock at the desired position.

Control

KnobsBurners

OFF

PILOT

IGN

LOW

OFF

PILOT

IGN

HIGH

OFF

Figure 15 - Burner Patterns

Image 14
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Safety Information Product Identification Local Codes Unpacking Product FeaturesSafety Device Piezo Ignition SystemLocating Heater Installation ItemsCheck GAS Type Installing Heater to Wall Marking Screw LocationsInstalling Two Mounting Screws Folding AnchorPlacing Heater On Mounting Screws Connecting to GAS Supply Pressure Testing GAS Supply Piping System Checking GAS Connections Pressure Testing Heater GAS Connections Manual Shutoff ValveLighting Instructions For Your Safety Read Before LightingOperating Heater Pilot To Select Heating Level Burner PatternsTo Turn OFF GAS to Appliance Manual Lighting ProcedureInspecting Burner Pilot Flame PatternBurner Flame Pattern Correct Burner Flame PatternCabinet Cleaning and Maintenance Trouble ShootingODS/PILOT and Burner Orifice Air PassagewaysFlame to go out. This Control knob set be Top Technical ServiceIng statement at Parts Not Under Warranty Service Hints Replacement PartsParts Under Warranty Parts Centrals Service Publications Accessory Valve GA5010Parts List Illustrated Parts BreakdownWarranty Information International