Hearth and Home Technologies 42-B, 42H-B owner manual Valve Access, Lift Out Doors

Page 13

E. Valve Access

•The gas valve can be accessed behind the cement refractory panel on the right side of the fireplace.

•Lift doors out and set aside. There is a washer under each door. Be careful not to loose those washers.

Washer

Figure 6.1 Lift Out Doors

•Remove logs if access is necessary after installation is complete. See Section 9.C. Remove logs in reverse order of set up.

•Remove grate if access is necessary after installation is complete. (Refer to Section 9.B.)

•Remove two screws on side of pilot shield and remove shield.

Figure 6.2 Remove Pilot Shield

•Use a phillips screwdriver to remove the two screws securing the refractory retaining strip. Remove the refractory side panel and set aside.

•Remove the inside valve access panel by lifting it up and out.

Figure 6.4 Remove Valve Access Panel

•Use a phillips screwdriver to remove the exterior valve access panel (remove four screws).

Figure 6.5 Remove Exterior Valve Access Panel

•Use a manometer on the lower out pressure tap. Start up the fireplace to verify the pressure and adjust as necessary. Reverse these steps to reassemble before log positioning.

Figure 6.3 Loosen Refractory Retaining Strip

Figure 6.6 Connect Manometer

Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev J 11/08 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents What to do if you smell gas This appliance must be installed outsideHot glass will cause burns Listing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals High Altitude InstallationsAppliance Certification Glass SpecificationsGetting Started Design and Installation ConsiderationsMoisture Resistance Inspect Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Select Appliance Location Framing and ClearancesFire Risk Fire Risk Odor RiskMantel Projections ClearancesVent Termination Minimum Clearances Termination LocationsSecuring and Leveling Appliance Appliance PreparationRemove Logs and Shipping Cover Fuel Conversion Gas Connection Gas InformationGas Pressure Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Lift Out Doors Valve AccessElectrical Information Intellifire Ignition System WiringShock Risk Fireplace FinishingFacing Material Noncombustible Facing DiagramClean the Appliance Appliance SetupGrate Assembly Placement Positioning the LogsFront Log SRV727 Reinstall Door Lock Glass AssemblyPlacing Lava Rock Before Lighting Appliance Operating InstructionsLighting the Appliance For Your Safety Read Before Lighting Lighting InstructionsFire Risk High Temperatures Frequently Asked QuestionsIssue Solutions After the Appliance is LitSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementGround Wire Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramParts List ¨ B. Service11/08 Service713Log-4036Set Box #3 Service Parts ListThis page intentionally left blank This page intentionally left blank Hearth & Home Technologies Limited Warranty ¨ C. WarrantyWarranty Contact Information
Related manuals
Manual 36 pages 59.15 Kb

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.
Top Page Image Contents