Hearth and Home Technologies 42-B, 42H-B Glass Assembly, Placing Lava Rock, Reinstall Door Lock

Page 19

D. Glass Assembly

WARNING

Handle glass with care.

•Inspect the glass for cracks, chips or scratches.

•Do NOT strike, slam or scratch glass.

•Do NOT operate appliance with glass door removed, cracked, broken or scratched.

•Replace glass door assembly as a complete assembly.

•The glass doors are included with and pre-installed in the appliance.

•To adjust doors, open them and loosen screws on top and bottom pivot pins. Slide each door as necessary and tighten screws.

•To adjust handle, loosen screws to move handles as necessary and tighten screws.

E. Placing Lava Rock

•After logs have been placed spread part of the lava rock (included) between the rock pan and ashlip (see Figure 9.10).

Rock Pan

Ashlip

Figure 9.10 Placement of Lava Rocks

Glass Specifications

Dakota42-B: Tempered

Dakota42L-B: Tempered

Dakota42H-B: Tempered

Dakota42HL-B: Tempered

F. Reinstall Door Lock

When logs and lava rock have been installed, or if the glass assembly has been adjusted, reinstall the door lock by inserting the screw at the top of the door. Tighten screw. You may refer to Section 5.A. if needed.

Locking Screw

Open Open

Figure 9.11 Reinstall Door Lock

Heat & Glo LifeStyle Collection • Dakota 42-B/Dakota 42H-B • 4036-909 • Rev J 11/08 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents What to do if you smell gas This appliance must be installed outsideHot glass will cause burns Listing Label Information/Location CongratulationsTable of Contents Glass Specifications High Altitude InstallationsListing and Code Approvals Appliance CertificationGetting Started Design and Installation ConsiderationsMoisture Resistance Inspect Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Fire Risk Odor Risk Framing and ClearancesSelect Appliance Location Fire RiskMantel Projections ClearancesVent Termination Minimum Clearances Termination LocationsSecuring and Leveling Appliance Appliance PreparationRemove Logs and Shipping Cover Fire Risk Explosion Risk Gas InformationFuel Conversion Gas Connection Gas PressureFire Risk Explosion Risk Asphyxiation Risk Lift Out Doors Valve AccessElectrical Information Intellifire Ignition System WiringShock Risk Fireplace FinishingFacing Material Noncombustible Facing DiagramPositioning the Logs Appliance SetupClean the Appliance Grate Assembly PlacementFront Log SRV727 Reinstall Door Lock Glass AssemblyPlacing Lava Rock Before Lighting Appliance Operating InstructionsLighting the Appliance For Your Safety Read Before Lighting Lighting InstructionsAfter the Appliance is Lit Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementGround Wire Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramParts List ¨ B. Service11/08 Service713Log-4036Set Box #3 Service Parts ListThis page intentionally left blank This page intentionally left blank Hearth & Home Technologies Limited Warranty ¨ C. WarrantyWarranty Contact Information
Related manuals
Manual 36 pages 59.15 Kb

42H-B, 42-B specifications

Hearth and Home Technologies has long been a leader in the realm of home heating and comfort solutions, and their 42-B and 42H-B models exemplify this commitment to quality and innovation. These models are designed to meet modern heating needs while providing an aesthetic appeal that enhances any living space.

One of the standout features of the 42-B and 42H-B is their impressive heating capabilities. With a BTU output that can efficiently heat large areas, these units are perfect for homeowners looking to maintain a comfortable environment during the colder months. The ability to generate substantial heat without consuming excessive fuel has made these models a preferred choice among energy-conscious consumers.

In addition to their efficient heating, the 42-B and 42H-B also incorporate advanced venting technologies. These models are designed with flexible venting options, allowing for both direct vent and B-vent installation. This versatility not only simplifies the installation process but also provides homeowners with more options in terms of their heating setup. Whether looking to install in a new build or retrofit an existing space, the 42-B and 42H-B fit seamlessly into various configurations.

Another notable feature of these models is their aesthetic design. Hearth and Home Technologies understands the importance of appearance in maintaining the overall decor of a home. The 42-B and 42H-B come with customizable front options, ensuring that each unit can match the individual style of a home. From traditional to contemporary looks, these models can complement any interior with elegance and charm.

Safety is a top priority for Hearth and Home Technologies, and the 42-B and 42H-B have been designed with several safety features to ensure peace of mind. The units come equipped with a glass front that remains cool to the touch, preventing accidental burns, and advanced safety shutoff mechanisms that activate in the event of a malfunction, ensuring that homeowners can enjoy their heating solutions without worry.

In conclusion, the Hearth and Home Technologies 42-B and 42H-B models combine efficiency, safety, versatility, and style. They offer an exceptional heating experience, making them an attractive option for anyone looking to enhance their home comfort. With their reliable performance and elegant appearance, these units stand as a testament to Hearth and Home Technologies' dedication to quality in the home heating market.
Top Page Image Contents