P1 |
| P Remove the following parts from the carton: |
| ||
79 |
| Two CYLINDER PINS | .(78) | ||
|
|
|
| One CYLINDER | .(79) |
|
|
|
| Set CYLINDER (79) on the Grill Frame and secure with the CYLINDER PINS | |
|
|
|
| (78). See detail P1. |
|
|
|
|
| Remove plastic protective cap from TYPE 1 nipple! Insert the nipple of the | |
|
|
|
| regulator (27) into the cylinder’s fuel valve inlet. See detail P2. Turn the | |
|
|
|
| regulator hand wheel clockwise to tighten. No tools are needed. The Hand | |
| 78 |
| 78 | Wheel will come to a complete stop when the connection is secure and gas | |
|
|
| will not flow until a positive seal is achieved. |
| |
|
|
|
|
| |
WARNING: During assembly of grill and when attaching or
P BACK
*Cylinder Not Included
On ENGINEERING CODE
SD113242
79
replacing the L.P. gas cylinder, insure that the gas supply hose is free of kinks and/or damage and is at least 3” away from hot surfaces such as the grill casting.
IMPORTANT! TO ENSURE PROPER GAS FLOW,
BURNER CONTROL VALVES MUST BE "OFF" BEFORE
OPENING THE GAS CYLINDER VALVE.
R2 | Gas Cylinder Valve |
|
79
78
27
78 | 78 |
(Pg. 13)