Cal Flame manual Barbecue Island Assembly, Unit Attachment

Page 7

Barbecue Island Assembly

Unit Attachment

1.Place the island sections together on the ground. Make sure the ground where the barbecue is placed is as level as possible for best alignment.

NOTE: If the ground is not level, use shims to level out the island sections. This needs to be done before you intall the bolts.

2.Connect the speakers, lights, and main power cables before sliding the sections together.

3.Insert the bolts through the pre-drilled holes from the inside of the barbecue island (total of four bolts on each side).

4.Tighten all bolts using a 9/16” wrench.

2009 Barbecue Islands

5

Installation / Assembly

LTR2009103, Rev. A

www.calspas.com

Image 7

Contents LTR20091036, Rev. a 12/16/08 Cleaning and Maintenance Barbecue Island AssemblyWarranty Placement and Location Safety InstructionsSet-Up Operation Barbecue Islands Precautions Regarding Children Maintenance and RepairStorage Unit Attachment Barbecue Island AssemblyStucco and Tile Application Rock / Stone Application Installation Assembly Sapphire Giallo New Vene Uba Tuba Brown Granite Kit InstructionsGriddle and Griddle Storage LED Lights Light Switch InstallationAbout Natural Stone Cleaning and MaintenanceScratches and Chips Granite TopDo’s Don’tsStain Removal Guide CleaningTile CareDO’s and DON’Ts of Tile Care Care and Maintenance of Tile GroutSynthetic Panel Manufacturer Warranty WarrantyWarranty Performance Warranty Limitations Disclaimers Customer ServiceLegal Remedies What To Do If You Smell Gas Barbecue Islands LTR20091038, Rev. a 12/16/08