STEP 8 - INSTALL CERAMIC BRIQUETTE TRAYS/ COOKING GRIDS
•Remove plastic completely from two Ceramic Briquette Trays (Item 36). Place Briquette Trays side by side on middle shoulder of front and rear firewall over the Burners.
•Place three Cooking Grids side by side on upper shoulder of front and rear firewall over the Ceramic Briquette Trays.
COOKING
GRIDS
CERAMIC
BRIQUETTES
TRAYS
STEP 9 - ATTACH LP CYLINDER TO GRILL
•Fill empty OPD LP Cylinder at your local LP gas supplier.
•From rear of grill, set bottom ring of LP Cylinder into Base of grill with the LP Cylinder valve facing out as shown. Pivot Cylinder Retaining Wire onto cylinder collar to prevent cylinder from moving.
•Turn Control Panel knobs to “off” position and verify LP Cylinder valve is closed.
•Remove the protective cap from the LP Cylinder valve. Hold Regulator in a straight line with LP Cylinder valve so the connection does not cross thread. Insert Regulator Nipple into the LP Cylinder valve. Hand tighten coupling nut
in clockwise direction. Do not use tools.
13