Calphalon 8353 owner manual Step, Assemble the Grill Body

Page 8

Step 2 - Continued

•Attach Cylinder Retaining Wire (Item 26) through hole in back of Pedestal as shown in detail.

STEP 3 - Assemble the Grill Body

•CAUTION: TWO PEOPLE REQUIRED!

•Make sure contents of grill have been removed for easy lifting.

•Place Body on Pedestal.

•Note: The Regulator and Hose should be hanging down inside the pedestal.

•Carefully Open Hood

Caution:

Do not leave grill unattended until

bolts are secured.

8

Image 8

Contents For Your Safety Use Care ManualImportant Safeguards Never use the grill without the Grease Tray in place Assembly Instructions IMPORTANT! Please ReadTM Calphalon Grill Parts List Assembly Instructions Unpacking the GrillAssemble the Pedestal Do not leave grill unattended until Bolts are secured StepAssemble the Grill Body Install Heat Shield Install Grease Tray Assemble Handle and Side TablesAssemble Side Tables Install Burners Adjust Tab if greater than 3/16Install Ceramic Briquette TRAYS/ Cooking Grids Attach LP Cylinder to GrillHow to perform a leak test View aLP Gas Cylinder Connecting/ Disconnecting LP Gas Cylinder to GrillGAS, CYLINDER, Hose Regulator Information Selecting a Location Before Using Your LP GAS GrillPrecautions LeakTesting Operating the LP GAS GrillConfirm each burner is lit before lighting another burner Lighting the Grill Using the Integral Ignition SystemPreparation Before Cooking Manual Lighting of the Grill Care and Maintenance Check Your Flame End of Cooking SessionTurn off Your LP Gas Grill Grill CookingPorcelain coated Cooking Surfaces Burner MaintenanceHow to clean porcelain coated cast iron burners Possible Cause Solution Problem Using the igniterUsing a match Burners will not lightProblem Possible Cause Solution Flames blow outImportant Notice LP not Supplied with GrillLimited Warranty Calphalon Grill