ASSEMBLY
1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining casters. Make sure the two locking casters are secured at the rear and the
Locking caster
A
Bent U pin
Front
Bottom shelf
Rear
2 | Attach side panels to bottom shelf using three |
7mm flat washers per panel.
IMPORTANT: Panel with magnet must be on left side of bottom shelf.
Left side panel
Magnet
Make sure side panels are pushed as far to the rear of bottom shelf as possible before fully tightening screws.
7mm lock washer
7mm flat washer
Right side panel (with a hole)
Front
13