DCS BGB30-BQR manual Grill placement onto cart, Final assembly

Page 31

CART ASSEMBLY INSTRUCTIONS

STEP 5:

Grill placement onto cart

A)Remove drip tray/pan for easier handling.Place grill head on cart

B)Slide back

C)Ease over rear flange

D)Secure with screws

E)Install bolts from Step 4. After head is in place, install bolts omitted from Step #4 and tighten all bolts on bracket.

NOTE: The bolt secures the side bracket to the grill head assembly for added side shelf strength.

Pinch Point

A)After drip tray/pan is removed, carefully place grill head on cart (2 person minimum).

B)Once Grill rests on cart, ease grill to rear of cart as shown.

C)Lift grill over rear flange of cart (be aware of pinch points).

C-1) Grill head should rest over rear cart flange as shown on right.

D)Secure grill to rear of cart with phillips-head screws (provided).

E)Install bolts omitted from Step 4 to secure grill body to the cart side for added strength.

STEP 6:

Final assembly

Install remaining screws in front of head to cart. Slide drip tray/pan back into place. Move side shelf bars up and set trays into place.

Secure grill to the front of the cart with Phillips-head screws (provided).

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Professional 30 BGB Grill Please Retain this Manual for Future Reference Message to OUR CustomersTable of Contents Important Safety Notice Safety Practices & PrecautionsGrill Placement Safety Practices & Precautions Grill Models Total GAS Consumption of the Grill with ALL Burners on HI GAS RequirementsTo HOOK-UP the Fittings Supplied with the Grill LP Tank Requirements LP GAS Hook UP Type 1 or QCC1 RegulatorClearances to Non-Combustible Construction Locating GRILL/BUILT-IN ClearancesInsulated Jacket LocationVentilation Requirements GeneralStandard layout for non-combustible enclosure BUILT-IN Construction DetailsBefore Testing Leak TestingTo Test Installer Final Checklist Installer CHECKLIST/BURNER AdjustmentsGrill Burner Flame Height LOW Setting Adjustments Grill Burner AdjustmentsGrill Burner Air Adjustment To AdjustRadiant Asssembly Installation Using the GrillGrill Important Using the Grill Replacement of Regulators and HoseGrilling Hints To Light the Grill Burner Using the GRILL/LIGHTING InstructionsMatch Lighting ROD Light Motor Working Area Using the RotisseriePreparation RecommendedCooking on Rotisserie Manual Lighting To Light the Rotisserie BurnerCare and Cleaning Grill burner cleaning Burner Removal and CleaningGrill Burner Low heat with knob in HI position TroubleshootingBefore Calling for Service Grill won’t light when the ignition button is pushedTEM Grill Burner AssemblyGrill Body Parts List Rotisserie Assembly Grill Cart Parts List Remove packaging Cart Assembly InstructionsTools Required not included Before Assembling the CartFinal assembly Grill placement onto cartSide shelf adjustment Side tray adjustmentGas hookup LP hookup Wiring Diagram Wiring Diagram BGB30-BQR ModelsHOW to Obtain Service ServiceDCS Will Not Pay For WarrantyLength of Warranty DCS Will Pay ForPage Page Litho in USA 09/2001

BGB30-BQR specifications

The DCS BGB30-BQR is a state-of-the-art gas monitoring and detection system, designed to ensure maximum safety and reliability in a variety of industrial environments. This advanced device integrates cutting-edge technologies and sophisticated features that make it a preferred choice for professionals in sectors such as oil and gas, manufacturing, and chemical processing.

At the heart of the BGB30-BQR lies its high-performance gas sensors, which are capable of detecting a wide range of hazardous gases including methane, propane, and hydrogen sulfide. These sensors utilize advanced electrochemical technology that allows for quick and accurate readings, ensuring that any potential gas leaks can be identified rapidly. The device is designed for real-time monitoring, providing continuous data to maintain safety in critical settings.

One of the standout features of the BGB30-BQR is its robust wireless communication capabilities. Equipped with built-in Bluetooth and Wi-Fi, the system allows for seamless integration into existing network infrastructures. This feature enables operators to access real-time data remotely via smartphones or tablets, empowering them to make informed decisions instantly. Additionally, the BGB30-BQR supports both local and cloud-based data storage, ensuring that historical data is available for analysis and regulatory compliance.

The BGB30-BQR is also built with durability in mind. Its rugged design meets tough environmental standards, making it suitable for both indoor and outdoor applications. With an IP68 rating, the device is resistant to dust and water ingress, ensuring longevity in challenging conditions.

Another significant characteristic of the BGB30-BQR is its user-friendly interface. The device comes with an intuitive LCD display that shows real-time gas level readings, battery status, and alerts for immediate troubleshooting. Furthermore, the device includes customizable alarm settings that can be tailored to suit specific operational requirements, ensuring prompt responses to any sign of danger.

In conclusion, the DCS BGB30-BQR gas monitoring system exemplifies innovation in safety technology. With its advanced sensing capabilities, robust communication features, durable construction, and user-friendly design, it stands out as a reliable solution for gas detection in various industrial applications. Investing in the BGB30-BQR not only enhances workplace safety but also boosts operational efficiency by providing critical data when it matters most.
Top Page Image Contents