DCS BGB30-BQR Troubleshooting, Before Calling for Service, Low heat with knob in HI position

Page 25

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE:

If the grill does not function properly, use the following checklist before contacting your dealer for service. You may save the cost of a service call. Troubleshooting is for general purposes only. If the problem persists and you feel you require service, contact your dealer or the nearest authorized agency to perform service. Only authorized agencies can perform warranty service. Call DCS Customer Service at (888) 281-5698.

Grill won’t light when the ignition button is pushed:

1.Ensure the grill is cool. Remove the grill top grates and the ceramic radiant trays, watch the electrode tip. You should see a spark jump from the tip of the electrode when the ignition button is pushed.

2.If there is no spark when ignition button is pushed, check the battery condition. Battery condition should be checked at least once a year.

3.Attempt to match light the burner (see page 17-18). Check to see that other burners on the unit operate. Clean ignition tip of any debris.

Burner flame is yellow or orange, in conjunction with the odor of gas:

1.Check the burner inlet for obstructions such as spider webs. Check the air shutter for proper adjustment.

2.Grill may be in a dusty area. Move to less dusty area if possible.

Low heat with knob in “HI” position:

1.If only one of the burners appears low, clean the orifice and burner, clearing ports of any obstruction (see page 25).

2.Grill may be in a dusty area. Move to less dusty area if possible.

3.Check for proper gas supply and pressure.

4.Pre-heat grill for a full 15 minutes.

5.If using LP, gas check for empty tank.

Optional Rotisserie won’t light:

1.Is there is a spark at the electrode?

2.Does the rotis burner light when attempting to match light?

Optional Rotisserie lights, but will not hold flame once button is released:

1.Continue holding safety valve button in depressed position until burner remains lit when released.

24

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Professional 30 BGB Grill Please Retain this Manual for Future Reference Message to OUR CustomersTable of Contents Important Safety Notice Safety Practices & PrecautionsGrill Placement Safety Practices & Precautions Grill Models Total GAS Consumption of the Grill with ALL Burners on HI GAS RequirementsTo HOOK-UP the Fittings Supplied with the Grill LP Tank Requirements LP GAS Hook UP Type 1 or QCC1 RegulatorInsulated Jacket Locating GRILL/BUILT-IN ClearancesLocation Clearances to Non-Combustible ConstructionVentilation Requirements GeneralStandard layout for non-combustible enclosure BUILT-IN Construction DetailsBefore Testing Leak TestingTo Test Installer Final Checklist Installer CHECKLIST/BURNER AdjustmentsGrill Burner Flame Height Grill Burner Air Adjustment Grill Burner AdjustmentsTo Adjust LOW Setting AdjustmentsRadiant Asssembly Installation Using the GrillGrill Important Using the Grill Replacement of Regulators and HoseGrilling Hints To Light the Grill Burner Using the GRILL/LIGHTING InstructionsMatch Lighting ROD Light Motor Preparation Using the RotisserieRecommended Working AreaCooking on Rotisserie Manual Lighting To Light the Rotisserie BurnerCare and Cleaning Grill burner cleaning Burner Removal and CleaningGrill Burner Before Calling for Service TroubleshootingGrill won’t light when the ignition button is pushed Low heat with knob in HI positionTEM Grill Burner AssemblyGrill Body Parts List Rotisserie Assembly Grill Cart Parts List Tools Required not included Cart Assembly InstructionsBefore Assembling the Cart Remove packagingFinal assembly Grill placement onto cartSide shelf adjustment Side tray adjustmentGas hookup LP hookup Wiring Diagram Wiring Diagram BGB30-BQR ModelsHOW to Obtain Service ServiceLength of Warranty WarrantyDCS Will Pay For DCS Will Not Pay ForPage Page Litho in USA 09/2001

BGB30-BQR specifications

The DCS BGB30-BQR is a state-of-the-art gas monitoring and detection system, designed to ensure maximum safety and reliability in a variety of industrial environments. This advanced device integrates cutting-edge technologies and sophisticated features that make it a preferred choice for professionals in sectors such as oil and gas, manufacturing, and chemical processing.

At the heart of the BGB30-BQR lies its high-performance gas sensors, which are capable of detecting a wide range of hazardous gases including methane, propane, and hydrogen sulfide. These sensors utilize advanced electrochemical technology that allows for quick and accurate readings, ensuring that any potential gas leaks can be identified rapidly. The device is designed for real-time monitoring, providing continuous data to maintain safety in critical settings.

One of the standout features of the BGB30-BQR is its robust wireless communication capabilities. Equipped with built-in Bluetooth and Wi-Fi, the system allows for seamless integration into existing network infrastructures. This feature enables operators to access real-time data remotely via smartphones or tablets, empowering them to make informed decisions instantly. Additionally, the BGB30-BQR supports both local and cloud-based data storage, ensuring that historical data is available for analysis and regulatory compliance.

The BGB30-BQR is also built with durability in mind. Its rugged design meets tough environmental standards, making it suitable for both indoor and outdoor applications. With an IP68 rating, the device is resistant to dust and water ingress, ensuring longevity in challenging conditions.

Another significant characteristic of the BGB30-BQR is its user-friendly interface. The device comes with an intuitive LCD display that shows real-time gas level readings, battery status, and alerts for immediate troubleshooting. Furthermore, the device includes customizable alarm settings that can be tailored to suit specific operational requirements, ensuring prompt responses to any sign of danger.

In conclusion, the DCS BGB30-BQR gas monitoring system exemplifies innovation in safety technology. With its advanced sensing capabilities, robust communication features, durable construction, and user-friendly design, it stands out as a reliable solution for gas detection in various industrial applications. Investing in the BGB30-BQR not only enhances workplace safety but also boosts operational efficiency by providing critical data when it matters most.
Top Page Image Contents