
Outdoor Grill Freestanding Carts (optional):

Install Liquid Propane (LP) Tank
Roll out storage ![]()
Drawers (2)
Locking
wheel
Freestanding Cart
Model OBC36
Roll out storage ![]()
Drawers (2)
Locking
wheel
Freestanding Cart
Model OBC52
Warming Drawer
Roll out storage
drawers
Locking
wheel
Freestanding Cart
Model OBCW52
Roll out LP tank
shelf
Locking
wheel ![]()
![]()
![]()
![]()
Roll out LP tank shelf
Locking
wheel ![]()
![]()
![]()
![]()
![]()
![]()
Roll out LP tank shelf
Locking wheel ![]()
| Gas Connection at | |
| Right Rear Corner | |
| Under Outdoor Grll | |
| Tank Gas | |
| Regulator (included) | |
LP Tank Valve | ||
Slideout LP Tank | Flexible Gas | |
Line (included) | ||
Storage Self on | ||
| ||
Optional Cart |
| |
| LP Tank | |
| (not included) | |
| 5 Gal Max. | |
| Shelf Capacity | |
Installing the LP Tank

Lighting Liquid Propane Grills
WARNING:
Open canopy before attempting to light the appliance. Failure to open the canopy could allow gas to accumulate which could cause an explosion.
NOTES:
1.Reference your installation instructions for proper LP gas line connections to the Dacor ® regulator and the “Main tank valve”.
2.Once the tank is properly installed:
•Open the canopy to full open position.
•Turn on the main tank valve.
•Light one grill burner at a time by pressing in on the control knob and turning it counter clockwise until you hear the clicking ignition sound. Your burner should ignite within 4 to 10 seconds.
•Repeat the last step with all control locations.

Lighting Natural Gas Grills
WARNING:
Open canopy before attempting to light the appliance. Failure to open the canopy could allow gas to accumulate which could cause an explosion.
NOTES:
1.Reference your installation instructions for proper natural gas line connections to the Dacor regulator.
2.Once you have confirmed that the electrical and gas are properly installed, begin the following processes:
•Open the canopy to full open position.
•Light one grill burner at a time by pressing in on the control knob and turning it counter clockwise until you hear the clicking ignition sound. Your burner should ignite within 4 to 10 seconds.
•Repeat the last step with all control locations.