Grill Assembly — 8300 Series
IMPORTANT: Remove all protective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling.
Tools Required (not provided):
—1/4” Hex Nut Driver
—Phillips Screwdriver
Optional:
— Battery Powered 1/4” Hex Nut Driver
Right Side Shelf Attachment
1.The right side shelf attaches to the right side of the grill (Fig. 12).
2.Secure the center of the shelf by inserting (2)
3.Secure the front of the shelf by inserting (2) self tapping screws into the front flange underneath the shelf (Fig. 14).
4.Secure the rear of the shelf by inserting (2) self tapping screws into the rear flange underneath the shelf (Fig. 15).
Fig. 12
Fig. 13
Fig. 14
Fig. 15
11