Coleman 9993 Series manual For Your Additional Safety, Special Note Concerning L.P. GAS Cylinders

Page 20

For Your Additional Safety

Current refillable L.P. gas cylinders are fitted with an Overfill Protection Device (O.P.D.). To insure that you retain this safe- ty-device, take your cylinder to an L.P. gas service

station for filling, or when exchanging your cylinder at a cylin- der exchange station, request that your replacement cylinder be fitted with the O.P.D. feature.

YOUR NEW GAS GRILL IS EQUIPPED WITH A TYPE 1 CONNECTION DEVICE WHICH HAS 3 SAFETY FEATURES (FIG. 55):

1.Proof of gas seal between the connector and the cylinder before gas flow takes place.

2.A flow-limiting device designed to limit the flow of gas in the event of a regulator or hose failure.

3.The connection has a thermal shut-off which will stop the flow of gas if the connection reaches a certain temperature.

Fig. 55

Valve

Nipple with

Excess Flow

Thermal

Sensitive

Handwheel

1-5/16" Acme Connection

Regulator

TYPE 1 CONNECTION ILLUSTRATION

For Your Additional Safety (continued)

CURRENT GAS CYLINDERS ARE ALSO EQUIPPED WITH AN OVERFILL PROTECTION DEVICE (O.P.D.) WHICH GREATLY REDUCES THE CHANCE OF ACCIDENTALLY OVERFILLING THE CYLINDER.

SPECIAL NOTE CONCERNING L.P. GAS CYLINDERS:

It is important to insure that your gas cylinder is properly purged before it is filled. If you purchase a new cylinder, please inform your propane gas dealer that this is a new cylinder and needs to be properly purged before being filled.

SPECIAL NOTE CONCERNING TYPE 1 CONNECTION DEVICES:

If you notice very small flames on the burner(s), you may have accidentally activated the flow-limiting device in the Type 1 connection device. Besides a rupture in the gas hose, the flow-limiting device may activate for one of the two following reasons:

1.Opening the burner valves before opening the cylinder valve. SOLUTION: Shut off the burner valves and the L.P. cylinder valve and open in the proper order:

a). Open the L.P. cylinder valve first, then b). Open burner valve and ignite the burner

according to the instructions in this manual for your grill.

IF YOU STILL HAVE A PROBLEM, THEN THERE MAY BE AIR IN THE CYLINDER DUE TO IMPROPER PURGING.

2.The L.P. cylinder was not properly purged before it was filled. SOLUTION: See your L.P. gas supplier.

20

Image 20
Contents Use, Care & Assembly Manual Contents General Safety InformationGeneral Installation Electrical AttachmentsGas Cylinder Cylinder SpecificationsPortable L.P. Gas Barbecue Cylinders Hose and Regulator Transporting the Refillable CylinderGrill Features 9993 Series Remove boxes a and C out the front door opening Fig Parts Identification 9993 Series Grill Assembly Assemble the WheelsAssemble the Wind Screen Assemble the Grease DiverterAssemble the Doors and the Tool Hook Assemble the Propane Tank Retainer20# LP Cylinder Installation Assemble the Side TablesLeak Testing Refillable Cylinders How to Check for LeaksWhen to test for leaks Fixing a Fuel LeakStart-Up Check List If you detect a leakMatch Lighting Lighting InstructionsLighting the Burners Shutting Off the Grill General Use and Correct Burner FlamesCondition The Grill Burner FlameCare, Maintenance and Cleaning Grilling Tips and HintsCase of Grease Fire Cooking MethodsCleaning the Venturi Suggested Cleaning MaterialsComponent Cleaning Steps For Cleaning VenturiReinstall the burners, heat tents and the cooking grates Troubleshooting Moving and StorageFor Your Additional Safety Special Note Concerning L.P. GAS CylindersColeman¨ Grill Warranty Registration Card Congratulations on Your NEW Coleman Grill Purchase Replacement Parts List 9993 Series Warranty Limited Three Year Warranty