Special Unpacking Instructions - 9993 Series
Read All the Unpacking Instructions before starting this section!
1.Cut the shipping straps and remove the top of the cardboard container.
2.Remove the door assemblies that are located in the protective packing on each end of the grill. Set the doors aside for a later assembly step.
3.Lift the cardboard container sides from the shipping base. Additional boxes of parts are located inside the grill cart (Fig. 7).
Fig. 7
| A |
| B |
D | C |
4. Remove boxes “A and “C” out the front door opening (Fig. 8).
Fig. 8
B
C
5. Remove two screws at location “E” with a “Phillips” screwdriver (Fig. 9).
Fig. 9
EE
6.Remove the left side panel and set aside for a later assembly step (Fig. 10).
Fig. 10
7. Remove the remaining large boxes and the grill hood (Fig. 11).
Fig. 11
8. Replace the left side panel and tighten the two screws (Fig. 12).
Fig. 12
7