LP Cylinder Conversion — 8350 Series
NOTE: This step applies to you only if you are converting your 8350 Series grill to use LP GAS. If you will be using your grill with NATURAL GAS, this section does not apply to you. Please skip back to the section titled “Natural Gas Installation - 8350 Series ”.
The 8350 Series grill is set up from the factory to use NATURAL GAS. If you want to use LP GAS, you must purchase the LP GAS CONVERSION KIT (sold separately). Follow the installation instructions provided with the LP GAS CONVERSION KIT.
LP GAS CONVERSION KIT (not shown)
Part Number | Description |
LP Cylinder Installation
1.Set the LP Cylinder in the Cylinder Support location with the outlet valve facing toward the right side of the grill (Fig. 6 and 7).
2.Insert the TYPE 1 Nipple of the regulator into the cylinder’s Fuel Valve Outlet as shown. Turn the regulator hand wheel clockwise to tighten. No tools are needed. The hand wheel will come to a complete stop when the connection is secure, and the gas will not flow until a positive seal is achieved.
IMPORTANT!
TO ENSURE PROPER GAS FLOW, BURNER
CONTROL VALVES MUST BE “OFF” BEFORE
OPENING THE GAS CYLINDER VALVE.
WARNING: During assembly of the grill and when attaching or replacing the L.P. gas cylinder, insure that the gas supply hose is free of kinks and/or damage and is at least 3 inches away from hot surfaces such as the grill casting.
Fig. 6
Fig. 7
11