Lighting Main Burners
1.Push and turn one of the main burner control knobs counterclockwise to the “HIGH” position. Wait 5 seconds. (Fig. 17 and 18)
2.Press and hold the electronic igniter button. You will hear a snapping sound. (Fig. 19)
3.If the burner does not light in 4 seconds, turn the control knob to OFF and wait 5 minutes for the gas to clear before trying again.
4.Repeat steps 1 through 3 to light the remaining burners.
5.If the burner does not light on the second try, turn the control knob to OFF and wait 5 minutes for the gas to clear, and then try
Match Lighting - Main Burners
1.Strike and place the burning long wooden match (or butane lighter with extension) through the spaces in the grill grates near the ports of the back crossover burner between the heat tents. (Fig. 20).
2.Push and turn the control knob counterclockwise to the “HIGH” position.
3.Repeat steps 1 and 2 to light the remaining burners.
CAUTION
Use a LONG wooden match or a butane lighter with an extension. Make sure all burner controls are off except for the burner being lighted. If a
Fig. 18
Fig. 19
Fig. 20
17