Grill Assembly — 8450 Series
Side Burner Installation
1.Install the burners and caps (Fig. 6 and Fig. 7).
2.Install the grate over the burners (Fig. 8).
Igniter Battery Installation
1.The AA battery, spring and igniter cap must be installed before using (Fig. 9).
2.Install the AA battery, negative end first.
3.Slide the spring assembly over the battery.
4.Screw the igniter cap onto the igniter (Fig. 10).
Test the Igniter:
A spark should appear at electrode tips. If the spark does not appear:
NOTE: It does not matter which ignition wire goes to which tab on the electrode module.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
11