Coleman 5400 LP manual 13-A, 13-B, 13-C, 13-D

Step

13

ÖAssemble the Side Burner to the Left Side Table.

ÖAssemble the Electrode to the Side Burner.

ÖNOTE: On some models, the Electrode is pre-installed by the factory.

Hardware shown actual size

(ZT)	(WQ)
Hair Pin	M4 X 10mm Screw
(1) Qty.	(1) Qty.

(Attached to Burner)

(YS)

M4 Hex Nut

(1) Qty.

13-A

13-A. Slip the Burner Tube through the Left Side Table.

13-B

Burner

13-C

ZT

YS

WQElectrode

13-C. Lock the Side Burner in place with one hairpin (ZT).

ÖInstall electrode as shown with one screw (WQ) and one hex nut (YS).

ÖNOTE: On some models, the Electrode is pre-installed by the factory.

13-D

Caution: Assemble the wires BELOW the burner tubes!

Burner

Valve

Tube

13-B. Align Burner Tube with Burner Valve.

ÖNOTE: Make sure Burner Valve is inserted into Burner Tube.

22

13-D. View showing Side Burner properly installed.