Coleman 5400 LP manual Bracket Locking Front Caster Per Corner Back

Step

2

ÖAssemble four Caster Brackets to the Grill Base.

ÖNOTE: On some models, the Caster Brackets are pre-installed by the factory.

ÖAssemble two Locking Casters to the front of the Grill Base.

ÖAssemble two Non-Locking Casters to the rear of the Grill Base.

Hardware shown actual size

(TN)

M6 x 15mm Screw

(12) Qty.

2-A. Assemble four Caster Brackets to the		2-A
	Grill Base using three screws (TN) in
	each bracket (see Fig. 2-B).	Front
Ö NOTE: The four Caster Brackets are
	identical. Rotate each Caster Bracket so
	three holes in each bracket align with
	three holes on the Grill Base.
Ö Tighten all fasteners.
Ö	NOTE: On some models, the Caster
	Brackets are pre-installed by the
	factory.
			Back
	2-B		Caster
			Bracket (x4)
		Caster
		Bracket
		2-C	Locking
	TN (x3)	Front	Caster
	Per Corner

	Back
	Non-
Locking	Locking
	Casters
Caster

2-C. Fasten Casters tight against the Caster Brackets.

9