Coleman 5400 LP manual 14-A, 14-B

Step

14

ÖAssemble the Electrode Wires and the Battery to the

Electrode Module. Note: The fuel hoses are not

shown in this step, for simplicity.

14-A		Top Burner Wires	14-A. Slip the Top Burner Wires through the
				large hole in the Top Panel.
			Ö	Slip the Side Burner Wire through the
				large hole in the Left Panel.
			Ö	Firmly push the Electrode Wires into
				the Electrode Module.
			Ö	Assemble the 9-Volt Battery to the
	Side Burner Wire			Electrode Module.
		Electrode Module	Note: The polarity is marked on the Electrode
				Module.
9-Volt Battery
	14-B			Top
				Burner
				Wires
	Igniter Button Wires
	(Note: Large Tabs)

TEST THE IGNITER:
A SPARK SHOULD APPEAR AT
ELECTRODE TIP.
IF THE SPARK DOES NOT
APPEAR:
-CHECK THE WIRE
CONNECTIONS TO THE
			Side Burner Wire
MODULE.
-CHECK PROPER
ASSEMBLY OF FRESH
9-VOLT BATTERY.
		Electrode
		Module
	9-Volt
	Battery

23