Kenmore 16238 manual FIG. a

I'l

%

/

NoTankTank

BracketBracket

Left hand leg assembly Right hand leg assembly

1.Turn leg assembly upside down as shown and insert caster plug.

Make sure caster plug tab is in line with notch in leg. (SEE FIG "A")

2.Turn leg assembly over and tap on a hard surface until the caster plugs are fully seated.

Locking Caster Non-Locking Caster

3.Insert locking casters into the caster plugs on front of leg assemblies and press in until caster is fully seated as shown.

Notch

Caster Plug

FIG. "A"

Insert caster into holes on outside corner of caster plug as shown.

Leg Assembly (Left Hand shown)

tabs are on front

side of leg Consoleassembliesmounting.

4.Insert non-locking casters into the caster plugs on rear of leg assembiles.