Kenmore 16238 manual I0nitorModule

32.Attachthetwowiresfromthecrosslighter andthetwowiresfromthesideburner

toanyofthefoursmallterminalson ignitormoduleasshown.

I0nitorModule

Next,Attachthetwowiresfromconsole

assemblytothetwolargeterminalsonignitor moduleasshown.

(2) Large

Terminals

Important: Be sure to attach wires correctly to terminals.

CorrectIncorrect

NOTE: Use one of the supplied plastic ties to bundle the two large terminal wires together, and one to bundle the four small terminal wires together.

33.After wiring ignitor module ensure that all burner knobs are in the off position before installing the battery.

Install the battery

34. Snap ignitor module tabs into holes on back left side of front

panel as shown.

NOTE: Do not remove ignitor module once installed. The plastic mounting tabs on the ignitor "hook" into the mounting holes and are not designed to be repeatedly removed and re-installed Replace battery in module with module in place..

23