Failure to comply with these instructions could
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Spiders and small insects can spin webs and nest in the grill Burner Tubes during transit and
warehousing | whic | gas flow |
| ||
obstruction |
| around | the | ||
Burner |
|
| K FIRE" | ||
can |
|
| )ate | an | |
unsafe | o |
|
|
| |
To | redu |
|
|
| you |
must cl, |
|
|
| ||
assemb |
|
| : once | ||
a | mont} |
|
| spiders | |
are |
|
|
| not | |
been |
|
| _. |
| |
1. | Remove | th_ | Burner | ||
| using | a |
|
|
|
2.Carefully lift each Burner up and away from the Gas Valve Orifice.
3.Check and clean Burner/Venturi Tubes for insects and insect nests. A clogged tube can lead to a fire beneath the grill.
4.Refer to the figure below and perform one of these 3 cleaning methods:
[] METHOD 1: Bend a stiff wire or wire coat hanger into a small hook as shown and run
the hook through the Burner Tube and inside the Burner several times to remove debris.
TO CLEAN BURNER TUBE,_
\
_ BurnerTube
[] METHOD 2: Use a bottle brush with a flexible handle and run the brush through the Burner Tube and inside the Burner several times to remove any debris.
[] METHOD 3: Use an air hose to force air through each Burner Tube. The forced air
should pass debris or obstructions through the Burner and out the Ports.
For safe operation ensure the Gas Valve Assem- bly Orifice is inside the Burner Tube before using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may cause
explosion and/or fire resulting in serious bodily injury and/or property damage.
|
| BBOBBBOB000BOBOBOB[ |
Gas Valve Assembly | Orifice | BumerTube |
LPG grill models must be used with Liquid
Propane Gas and the regulator assembly
supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert the grill from one fuel type to another is extremely
hazardous and will void the warranty.
Never use your gas grill in a garage, porch, shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air around your gas grill housing.
Never disconnect the gas regulator or any gas fitting while your grill is lit. A lit grill can ignite leaking gas and cause a fire or explosion which could result in property damage, personal injury or death.
Keep gas regulator hose away from hot
grill surfaces and dripping grease. Avoid
unnecessary twisting of hose. Visually inspect
hose prior to each use for cuts, cracks,
excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call
Sears at
for a Kenmore replacement hose.
PRE-ASSEMBLY
Read and perform the following
[] Tools Required forAssembly include:
•protective work gloves
•protective eyewear
•"L" Screwdriver (included in Hardware Pack in parts box)
[] You will need assistance from another person to handle the grill head and other large, heaw parts.
[] Open Lid of shipping carton and remove parts box and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.
[] Slice all four corners with a utility knife to lay open the carton. This allows you to remove the grill head
and components packed inside.
[] Use the Hardware and Part Diagrams to ensure all items are included and free of damage.
[] Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box or you have questions during the assembly process, call the: