6. Charcoal Bin Assembly
a). Place Charcoal Bin Bottom Panel (Q) on a fiat level surface, Connect Charcoal Bin Left (R) and Right (S) Side panels to Bottom Panel by securely hooking Bottom panel tabs into Side panel slots, See Fig. 9.
b). Securely hook Charcoal Bin Back Panel (T) tabs into Left and Right Side panel slots. See Fig. 10.
c). Use 6 AA Round Head Screws and 6 BB Lock Washers to connect Charcoal Bin Front Panel (U) to Side Panels and Bottom Panel. See Fig. 11. Note: Connection tabs go on the outside of Side and Bottom panels.
d)Use 2 AA Round Head Screws and 2 BB Lock Washers to attach Charcoal Bin Handle (V) to Charcoal Bin Front Panel (U). See Fig. 12.
Fig. 9
R
Q
Fig. 10
R!
T
S
Fig. 11
R
U
Fig. 12
AA
BB
U
10