Aussie 6804T8UK91 manual Warming Rack, End of Cooking Session

Page 26

26

Warming Rack

!WARNING

To reduce the risk of fire or flare-up from grease drippings:

When cooking food on the warming rack, make sure no Burners are on directly under the Drip Pan.

Clean grease drippings away from grill after each use.

Warming Racks are a convenient way to cook food, keep cooked food warm or to warm items such as bread or rolls. To keep foods warm, set the Burners on Low or turn off all that are not needed. When cooking food on the Warming Rack, follow procedures for “Roasting (Indirect Cooking).” Be sure to place a pan or drip tray under the food.

When opening the Hood, be alert of dripping fat from the Warming Rack that could drip onto the back of the grill. Always check that your Warming Rack is properly fitted before use. Wipe away any dripping grease.

End of Cooking Session

!WARNING

To reduce the risk of serious bodily injury or death from fire or burn hazard:

Allow grill and the grease in the Foil Pan to completely cool before emptying, handling parts, cleaning, moving, or storage.

Empty the Foil Pan and Grease Pan after each cooking session so excessive grease does not accumulate.

Never light the LP gas grill without the Foil Pan, Grease Pan, and Bottom Panel in place.

1.After each cooking session, close the Hood and turn the Burners to the “High” position and burn for five minutes. This will burn off some cooking residue, thus making cleaning easier. (Side Burner not affected.)

2.When you have finished using your grill, turn the Control Knobs clockwise to the “Off” position.

3.Turn off the gas at the LP Gas Cylinder valve by turning the handle clockwise until it stops.

4.Wait until the grill is cool before closing the Hood, cleaning, or putting on a grill cover.

5.Regularly clean your LP gas grill between uses and after extended storage periods. To maintain the condition and extend the life of your grill, we strongly recommend that the unit be covered when stored outside for any length of time, especially during the winter months.

Image 26
Contents LP Gas Grill Assembly and Use Manual 6804T8UK91Tools Required for Assembly Supplied with Grill Carbon Monoxide HazardPacking List DescriptionContents Preparation for AssemblyStep Cabinet Bottom Assembly Assembly InstructionsStep Caster Assembly Step Side Panel Assembly Step Front Crossbar Assembly Step Cabinet Upright AssemblyStep Door Handle Assembly Step Cylinder Guard AssemblyCylinder Blocking Wire Assembly Assemble Right Door in the same way Step Door AssemblyStep Hood/Body To Cart Assembly Step Side Table Assembly Step Side Burner Valve Assembly Step Side Burner Igniter Wire ConnectionStep Bottom Body Panel Assembly Step Side Burner Control Knob AssemblySide Burner Grid Assembly Foil Pan/Grease Pan AssemblyStep Warming Rack / Flavor Activator / Cooking Grid Assembly Step Battery in Igniter InstallationLP Gas Cylinder Connecting/Disconnecting the GasUsing Gas LP Hose and Regulator Connecting LP Gas CylinderDisconnecting LP Gas Cylinder Selecting a Location Before Using Your LP Gas GrillInstallation Codes Performing a Leak TestHow to Perform a Leak Test First Time USE and as required Page Lighting the Grill Using the Pulse-Spark Ignitor Off positionManual Lighting of the Grill on Manually Lighting the Grill Manually Lighting the Side Burner Lighting the Side BurnerCheck The Flame Manually Lighting the Side Burner Cooking On the Gas Grill Grill Cooking Direct MethodIndirect Cooking Roasting Roasting Indirect MethodDirect Cooking on the Grids Warming Rack End of Cooking SessionCare and Maintenance Cleaning the GrillHow to Clean the Burners Open up Storage Troubleshooting EmergenciesSee How to Clean Burners in Care and Maintenance Clean the Burners. See How to Clean Burners in CareMaintenance Important Notice Parts Illustration Parts List Key Description QuantityLimited Warranty Meco Corporation Limited Warranty