28
In order to prevent flashbacks, the Burner(s) should be removed from the grill and cleaned periodically, especially if the grill has been stored for an extended period of time.
|
| Valve |
| Control Knob | Burner |
|
| |
|
| Spide webs or nest |
Fig. 15 |
| inside Venturi Tube |
|
|
Venturi Tube
How to Clean the Burners
1.Make sure the Control Knobs are turned “Off” and the grill is completely cooled.
2.Carefully remove Cooking Grids and Flavor Activators.
3.To remove each Main Burner, first remove the nut & bolt that fastens the burner flange to back wall. (Fig. 16) Leave Side Burner in place.
4.Slide each Main Burner toward the grill front to disengage tab at rear of burner from slot in back wall of bowl. Gently lift the rear of the Burner. (Fig. 17) Slide the Burner towards the grill back to move the Venturi Hole off of the Valve nozzle. (Fig. 18) Lift each Main Burner from the grill.
Remove nuts and bolts.
Fig. 16 | Fig. 17 | Lift Burner up and out. |
|
| |
|
|
|
View from inside front body
Valve nozzle
Fig. 18
Burner Venturi Hole fits centrally around Valve nozzle.