Aussie 6804T8UK91 manual Assembly Instructions, Step Caster Assembly, Step Cabinet Bottom Assembly

5

Assembly Instructions

Step 1

Caster Assembly

Lay Cabinet Bottom Panel upside down, so that the flat surface is on the floor. Assemble Fixed Casters to the LEFT Side (the side closest to the cutouts) of Cabinet Bottom Panel and Swivel Lock Casters to the RIGHT Side of Cabinet Bottom Panel. Insert 1/4-20 x .60” Bolts through the caster bracket holes into the threaded holes in the Cabinet Bottom Panel. Tighten the bolts. Push the lever on the two Locking Casters to lock so the caster wheels do not roll.

Fixed Casters

1/4-20 x .60” Bolt set

16 pc

Swivel Lock Casters

Step 2

A. Cabinet Bottom Assembly

With Back Panel on floor, place Cabinet Bottom Panel against Back Panel edge and align the holes. Install three 1/4-20 x .50 Bolts through the holes and secure with three 1/4-20 Nuts.

1/4-20 x .50” Bolt set

3 pcs