Aussie 6703T8DV31 manual Step Cart Frame Assembly, Step Wheel Assembly

6 7

Step 3

Cart Frame Assembly

Attach Left Leg Frame and Right Leg Frame to Cart Bottom Panel with eight 1/4-20 x 1.50” Bolts. Fit one Frame onto Bottom Panel at a time and insert the 1.50” bolts through the Legs into the sides of the Bottom Panel. Tighten all securely.

1/4-20 x 1.50” Bolt set

8 pc

Step 4

Wheel Assembly

Attach the Wheel by first inserting the Axle through the Wheel then the Axle through the Leg. Place the Washer on the end of the Axle extending out of the opposite side of the Leg. Secure all in place by inserting the Cotter pin through the hole in the end of the Axle. Snap the Wheel Cover onto the Wheel.

Wheel

Axle

Axle Pin

Washer

Wheel Cover