Broilmaster P4, P3 owner manual Installing Racks, Installing Char-Master Briquets, Grid Lifter

GRILL ASSEMBLY

Installing Racks

Place the briquet rack on the burner assembly.

Position the ceramic briquets evenly on the briquette rack without overlapping.

Set the multilevel cooking grids FIGURE 17.

Installing Char-Master Briquets

Individually place the ‘Char-Master’ briquets in a single layer evenly on your grill’s briquet rack; DO NOT dump them onto the briquet rack. A single layer of ‘Char-Master’ briquets is all that’s needed. DO NOT overlap or stack the briquets. See FIGURE 17.

After properly placing the ‘Char-Master’ briquets on your grill’s briquet rack, there may be some briquets left over. Save them for future use.

Before cooking, always preheat the grill as directed by the grill’s operating instructions. Hot briquets cause better, quicker cooking and better flavor.

Cleaning

Routine preheating and routine burn-off (also called postheating) of a grill will clean the ‘Char- Master’ briquets. Periodically turn the briquets over while they are cool.

Grid Lifter

Assemble the grid lifter as shown. FIGURE 18.

When positioning or removing grids always use the grid lifter provided with your grill.

3738

4

FIGURE 17

5

17

FIGURE 18

38

37

P3, P4 Page 11