GRILL ASSEMBLY
Burner Stabilizing Bracket
(Portable Cart Models Only)
Tip: Test the alignment of the burner stabilizing brackets before tightening the burner stabilizing bracket.
Install the burner stabilizing bracket (41) and fasten with the
FIGURE 9 | 41 |
|
8
INSTALL THIS SIDE UP |
FIGURE 8
36
Radiation Shield
Place the radiation shield (20) in the grill bottom. FIGURE 9.
20
19
FIGURE 10
Installing the Burner
Insert the burner assembly into the grill bottom with the venturi tubes facing the front of the grill. FIGURE 10.
The gas jets from the control valve will be inside the ends of the venturi tubes when properly installed.
FIGURE 11.
FIGURE 11
Air
Shutter
Venturi | Shutter Set | 11 |
Tube |
| |
Screw |
| |
|
|
P3, P4 | Page 9 |