Grill Location, Gas Type | Broilmaster T3CN-1 T3CF-1, T3CFN-1, T3-1

PROPANE GAS GRILLS

Grill Location

When choosing the ideal location for your Broilmaster Pre- mium Gas Grill, remember this grill is designed for outdoor use ONLY.

You should never install or operate your grill in any building, garage, or other enclosed area.

For your safety, this grill should not be installed or operated under any combustible materials, such as carports, covered porches, awnings, or overhangs.

Never install or operate your grill in or on any recreational vehicle or boat.

CAUTION: The installation and operation of this grill at clearances less than speciﬁed below may lead to the possibility of ﬁre, property damage, or personal injury.

A minimum clearance of sixteen (16") inches is required from the sides of the grill to any combustible material.

A minimum clearance of eighteen (18") inches is required from the back of the grill to any combustible material.

Some examples of combustible materials are a wall, a fence, patio furniture, or the wall of your home.

The area surrounding the grill should be clear to ensure proper ventilation. Do not obstruct the ﬂow of combustion and ventilation air in any way. The ventilation openings on the propane cylinder enclosure must also remain free and clear of debris.

Portable grills should be level and positioned away from direct wind prior to each use.

WARNING: Do not install or operate this grill where gasoline or other ﬂammable materials are used or stored. Failure to comply with this warning could result in explosion or ﬁre causing property damage or personal injury.

Gas Type

Never use Liquid Propane (LP) gas with a grill designed for Natural gas, or Natural gas with a grill designed for Liquid Propane gas. The type gas required for your grill can be determined from the product identiﬁcation label located on the grill’s control panel. Questions regarding different types of gases should be directed to your gas supplier.

Cylinder Requirements

Your Broilmaster Premium Gas Grill requires a standard twenty (20) pound propane gas cylinder.

The maximum height allowable for a replacement cylinder is approximately twelve (12") inches (30.5 centimeters).

The propane gas cylinder used must be:

1.Constructed and marked in accordance with the speci- ﬁcations for LP gas cylinder of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes for Transportation of Dangerous Goods; and Commission as applicable.

2.Provided with a listed overfilling protection device (OPD).

3.Provided with a listed safety device having direct access with the vapor space of the cylinder and the cylinder supply system must be arranged for vapor removal.

4.Provided with a shutoff valve terminating in a valve outlet as speciﬁed in the Standard for Compressed Gas Cylinder Outlet and Inlet Connections, ANSICGA-V-1.

5.Provided with a plug to effectively seal off the cylinder outlet when the cylinder is being stored or transported.

6.Provided with a collar to protect the cylinder valve.

Caution: Do not use a propane gas cylinder which has a capacity greater than twenty (20) pounds with this grill and side burner.

B101051-0-1106

Page 13

T3-1, T3CFN-1, T3CN-1 T3CF-1, T3N-1 T3C-1 specifications

The Broilmaster T3 series comprises a lineup of high-quality grills designed for outdoor enthusiasts who crave grilling excellence. This series includes models such as the T3CFN-1, T3CN-1, T3CF-1, T3-1, T3N-1, and T3C-1, which share a range of innovative features and technologies that set them apart in the grilling market.

One of the standout features of the Broilmaster T3 grills is their construction. Built with heavy-duty cast aluminum, these grills balance lightweight design with robust durability, meaning they can withstand the elements while providing consistent performance. The powder-coated finish not only enhances the grill’s aesthetic appeal but also offers a layer of protection against rust and corrosion.

Broilmaster T3 models are equipped with the patented “Dual-Heat System” that allows for versatile cooking options. Users can toggle between direct and indirect heat, making it easy to sear meats or cook larger cuts more slowly. The solid stainless-steel burners provide efficient and even heat distribution, ensuring that every meal is cooked to perfection.

In terms of technology, the T3 series incorporates an advanced ignition system that allows for quick starts, paired with the stainless-steel cooking grids that enhance heat retention and flavor. The grilling surface is spacious enough to accommodate large meals, making these grills ideal for gatherings and family events.

One of the most appreciated characteristics of the Broilmaster T3 series is its user-friendly design. The grill features an easy-to-read temperature gauge, side shelves for additional preparation space, and a convenient grease management system that simplifies cleanup. Additionally, the optional accessories, such as rotisserie kits and smoker boxes, enable users to expand their culinary horizons.

The Broilmaster T3CFN-1, T3CN-1, T3CF-1, T3-1, T3N-1, and T3C-1 share an overall commitment to quality, performance, and innovation. With their sturdy build, versatile cooking options, and thoughtful design, these grills cater to both novice and experienced grillers alike, ensuring that every outdoor cooking experience is a memorable one. Whether you’re grilling burgers for a weekend cookout or slow-roasting a brisket for a special occasion, the Broilmaster T3 series stands ready to deliver exceptional results every time.