2JANE manual Adding extended features to a Phaser 340 Upgrade Kit Z340FX

Adding extended features to a Phaser® 340 — Upgrade Kit Z340FX

14.Follow the instructions included with the font disks shipped with this upgrade to install the fonts on your computer.

Setting the printer’s IP address

If you replaced the PostScript code ROM SIMM — Upgrade kit Z340FX Option 01 you will have to set the printers IP address. How you set the IP address in your printer depends on a number of factors such as the protocol used by your host TCP/IP network, whether or not you use a boot server, and the types of PCs or workstations available to you. The topic of setting the printer’s IP address is fully explained in the Chapter 9 topic “Configuring your printer” in the PhaserShare Network Cards and Software User Manual. The instructions for setting the printer’s IP address are also available on the Tektronix web page: http://www.tek.com/Color_Printers/userdoc.

Return the old ROMs to Tektronix

1.Repack the old PostScript code ROM SIMM (if replaced) and the print engine ROM in the anti-static bags. Place them in the shipping box.

2.In the U.S.A.:

a.Write the printer’s original serial number on the shipping return label.

b.Securely tape the box closed and mail it to the pre-addresses location. Postage is prepaid.

Outside the U.S.A.:

a.Affix the special international shipping return label, included with this update kit, to conceal the original U.S. shipping label.

b.Write the printer’s serial number on the shipping return label.

c.Tape the box closed and ship the box to Tektronix.

7