2Wire AVX-7300 operation manual Adjusting the Bright, Adjusting the Color

Setting the Display

Adjusting the Bright

You can adjust the bright of the picture.

1	Press the WIDE button and select the Bright mode (BRIGHT) in the
	Display Setting Menu.
	Adjust the Bright.
2

Note:

•The density of the display black can be adjusted within the range of “–24” to “+24.”

•The adjustment values are recorded separately for the AV, VTR and RGB video. The adjust- ment values of a component (AV) connected to the AV-BUS input are also recorded separate- ly. Adjustment values are recorded when the vehicle lights are off (bright daylight) or on (dark night) respectively.

Adjusting the Color

You can adjust the color of the picture.

1	Press the WIDE button and select the Color mode (COLOR) in the Display
	Setting Menu.
	Adjust the Color.
2

Note:

•“–24” to “+24” is displayed as it shifts from light color to dark color.

•The adjustment values are recorded separately for the AV, VTR and RGB video. The adjust- ment values of a component (AV) connected to the AV-BUS input are also recorded separate- ly. Adjustment values are recorded when the vehicle lights are off (bright daylight) or on (dark night) respectively.

15