2Wire AVX-7300 Adjusting the Hue, Adjusting the Dimmer, Adjust the Hue, Adjust the Dimmer

Page 21

Adjusting the Hue

You can adjust the hue of the picture.

1

Press the WIDE button and select the Hue mode (HUE) in the Display

 

Setting Menu.

 

 

Adjust the Hue.

2

Note:

The display changes within a range from “–24” to “+24” as the distinction of the picture changes from reddish to greenish.

The adjustment values are recorded separately for the AV, VTR and RGB video. The adjust- ment values of a component (AV) connected to the AV-BUS input are also recorded separate- ly. Adjustment values are recorded when the vehicle lights are off (bright daylight) or on (dark night) respectively.

Adjusting the Dimmer

The brightness of the LCD screen can be adjusted automatically to the brightness you set to match the ambient brightness. Separate adjustment values can be recorded for bright condi- tions (yellow) as well as dark conditions (blue).

The brightness of the LCD screen will be adjusted automatically in accordance with the ambient brightness based on the setting values.

The adjusted value is memorized when the setting screen disappears.

1

Press the WIDE button and select the Dimmer mode (DIMMER) in the

 

Display Setting Menu.

 

 

Adjust the Dimmer.

2

Setting the Display

16

Image 21
Contents AVX-7300 To establish a safe level Level ExampleFor U.S. and Canadian Models PrecautionAbout This Product 7U.S.AImportant Safeguards Before Using Contents Before Using This Product Before UsingHow to Use This Manual Before UsingTo Ensure Safe Driving Be Sure to Adjust Picture BrightnessResetting the Microprocessor Preventing the Battery from Becoming ExhaustedResetting Case of TroubleTheft Protection Detaching and Replacing the Front PanelDetaching the Front Panel Replacing the Front PanelKey Finder Deploying the Display Operation of the DisplayOperation of the Display Turn your vehicle’s engine onAdjust the screen to an easily viewable angle Screen Angle AdjustmentTurn the vehicle’s engine OFF Closing the DisplayChanging the Wide Mode Switch to the desired illumination color Switching the Illumination Color For European modelsSwitching to RGB Switching the Video SourceSwitch to RGB Switching to AV and VTROperating the Setting Menu Setting the DisplayEntering the Display Setting Menu Setting the DisplaySetting the Automatic Open Mode Switching the Video Select SettingOpen in the Display Setting Menu Switch the automatic open ON/OFFAdjusting the Color Adjusting the BrightAdjusting the Dimmer Adjusting the HueAdjust the Hue Press the Wide button and select the Dimmer mode DimmerOthers Using the Display CorrectlyHandling the Display OthersAbout the Liquid Crystal Display LCD Screen Keeping the Display in Good ConditionAbout the Small Fluorescent Tube Appendix SpecificationsAppendix General DisplayAppendix Page Page Pioneer Corporation