16 SIDE BURNER TROUBLESHOOTING
PROBLEM | CHECK | CURE |
|
|
|
Side Burner does not light. | Is gas supply off? | Turn supply on. |
| The excess flow safety device, | To reset the excess flow safety device turn all burner control |
| which is part of the barbecue to | knobs and the cylinder valve OFF. Disconnect the regulator from |
| cylinder connection, may have | the cylinder. Turn burner control knobs to HIGH. Wait at least 1 |
| activated. | minute. Turn burner control knobs OFF. Reconnect the regulator |
|
| to the cylinder. Turn cylinder valve on slowly. Refer to “Lighting |
|
| Instructions”. |
|
|
|
Flame is low in HIGH position | Is the fuel hose bent or kinked? | Straighten hose. |
|
|
|
Push button ignition does not | Does burner light with a match? | If match lights burner, check igniter (see below). |
work. |
|
|
|
|
|
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in the OFF position.
Make sure black wire is connected between the igniter and electrode
(1). Make sure white wire is connected between the igniter and grounding clip
(2). Spark should be a white/blue color, not yellow.
1)Igniter Wire
2)Ground wire
3)Burner
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
(3) |
(1) |
(2) |
(2) |
(1) |