Weber 55062 manual Install Left Work Surface, Check that all burner valves are off

Page 13

Installing Work Surfaces & Gas Connection Guidelines

Install Left Work Surface

You will need left work surface, two 1/2 inch bolts, two nylon washers and a 7/16 inch or adjustable wrench. Insert the left work surface tabs in the slots in the frame(1). Slip washers on the bolts and insert the bolts as shown(2). Tighten

(1)(2)

Check that all burner valves are off

You will need: burner control knobs.

Valves are shipped in the OFF position, but you should check to be sure that they are turned OFF. Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn, they are off. Proceed to the next step. If they do turn continue turning them clockwise until they stop, then they are off. Proceed to the next step.

Install Side Burner Assembly

You will need side burner assembly (assembly includes mounting frame), two 1/2 inch bolts, two nylon washers and a 7/16 inch or adjustable wrench.

Note: Remove protective covers from tabs of side burner

Insert the side burner tabs in the slots of the frame(1). Slip washers on the bolts and insert the bolts as shown(2). Tighten bolts with wrench.

(1)(2)

C049.a

C-1

Image 13
Contents Genesis GOLD-C Liquid Propane GAS Units only Customer Service Center South Hicks Road Palatine, IL WarrantyContents Operating Gas Supply Testing For Installation in CanadaStorage Genesis Gold-C NG Manifold, Hose and regulator assembled Page Remove Grill from Lower Packaging Remove Packaging from GrillPage Install the slide out bottom tray Assembly InstructionsInstalling the warming rack Installing the Warm-Up BasketInstall the bottom shelf Install the condiment basketInstall Side Burner Assembly Install Left Work SurfaceCheck that all burner valves are off Install Gas Supply General Specifications for Piping Test Connections Gas Line PipingRemove the control panel Check for gas leaksReinstall control panel after checking for gas leaks To Extinguish LightingManual Lighting Lighting only the side burner Lighting the Side BurnerCooking CleaningStorage Inspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceMain Burner Cleaning Procedure General MaintenanceWeber Spider Stopper Guards Replacing Main Burners Crossover Ignition System Operations Burners burn with a yellow or Flame is low when burner is onOrange flame, in conjunction with Smell of gasFlame is low in High position Side Burner does not lightFlame is very yellow Conjunction with the smell of gas