Weber A103.A manual Burners burn with a yellow or, Orange flame, in conjunction with, Smell of gas

Page 35

Troubleshooting

Problem

 

Check

Cure

Burners burn with a yellow or

 

Inspect Weber Spider Stopper

Clean Weber Spider Stopper

orange flame, in conjunction with

 

Guards for possible obstructions.

Guards. (See Section “Annual

the smell of gas.

 

(Blockage of holes.)

Maintenance”)

 

 

 

 

Burner does not light, or flame is

 

Is fuel hose bent or kinked?

Straighten fuel hose.

low in HIGH position.

 

 

 

 

Does the Front burner light with a

If you can light the Front burner with

 

 

 

 

match?

a match, then check the Crossover

 

 

 

Ignition System.

 

 

 

 

Experiencing flare-ups:

 

Are you preheating barbecue in the

All burners on high for 10 to 15

 

 

prescribed manner?

minutes for preheating.

 

 

 

 

 

 

Are the cooking grates and

Clean thoroughly. (See Section

 

 

Flavorizer bars heavily coated with

“Cleaning”)

 

 

burned-on grease?

 

CAUTION: Do not line the

 

 

 

 

 

 

bottom tray with aluminum foil.

 

Is the bottom tray “dirty” and not

Clean bottom tray

 

 

allowing grease to flow into catch

 

 

 

pan?

 

 

 

 

 

Burner flame pattern is erratic.

 

Are burners clean?

Clean burners. (See Section

Flame is low when burner is on

 

 

“General Maintenance”.)

HIGH. Flames do not run the

 

 

 

whole length of the burner tube.

 

 

 

 

 

 

 

Inside of lid appears to be

 

The lid is porcelain-on-steel, not

Clean thoroughly. (See Section

“peeling.” (Resembles paint

 

paint. It cannot “peel”. What you are

“Cleaning”.)

peeling.)

 

seeing is baked on grease that has

 

 

 

turned to carbon and is flaking off.

 

 

 

THIS IS NOT A DEFECT.

 

 

 

 

 

If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

D-9

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Gas Grill Liquid Propane GAS Units only Customer Service Center South Hicks Road Palatine, IL WarrantyContents General Instructions Genesis Silver-C NG Page Page Page Page Assemble frame Assemble wheel frameAdd back panel Continue frame assemblyComplete frame assembly Add front panelInsert casters Add cooking box assemblyOmmend That this Installation be Done by a Professional Install Gas Supply General Specifications for PipingTest Connections Install igniterGas Line Piping Connect flexible hose to manifold Install manifold bracketCheck that all burner valves are off Install the slide out bottom tray Install Lid Right swing-up work surface Install the right end trim piece with tool holdersBoard Do not use the swing-up work surface as a cuttingYou will need side burner Install side burnerWay and do not add bolts yet Install the left end trim piece and swing-up workSurface Shown, do not push the trim piece in allDo not use the work surface as a cutting board Install the work surfaceChecking Check for gas leaksTime you disconnect and reconnect a gas fitting Your barbecue was dealer or store assembledBox with the rounded sides up Install Flavorizer Bars and Cooking GratesRetighten the fitting with a wrench and recheck for Set the cooking grates onto the ledges in the cookingInstall the thermometer Installing the warming rack Install the bottom shelfTo Extinguish LightingManual Lighting Lighting only the side burner Lighting the Side BurnerStorage CleaningCooking Inspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceWeber Spider Stopper Guards General MaintenanceReplacing Main Burners Crossover Ignition System Operations Smell of gas Flame is low when burner is onBurners burn with a yellow or Orange flame, in conjunction withConjunction with the smell of gas Side Burner does not lightFlame is low in High position Flame is very yellow

C075.A, A103.A, B069.A, D082.A specifications

The Weber D082.A, B069.A, A103.A, and C075.A are part of Weber's distinguished range of high-performance electronic control devices, specifically designed for various industrial and commercial applications. Each model showcases distinctive features and cutting-edge technologies that enhance operational efficiency and reliability.

The Weber D082.A is renowned for its robust build, integrating advanced automation technology. It offers versatile programming options that allow users to customize operation modes based on specific applications. The D082.A supports multiple communication protocols, ensuring seamless integration with existing control systems. It is equipped with a high-resolution display for real-time monitoring and diagnostics, enabling users to make quick adjustments and enhance productivity. The protective design resists environmental challenges, making it suitable for harsh industrial settings.

Next, the B069.A model is designed with an emphasis on energy efficiency. It employs intelligent power management systems to reduce energy consumption while maintaining high output performance. This device is also equipped with advanced fault detection algorithms that quickly identify potential issues, minimizing downtime. Moreover, the B069.A features an intuitive user interface that simplifies configuration and operation, ensuring that even operators with limited technical knowledge can manage the system effectively.

The A103.A highlights its adaptability through modular design, allowing businesses to tailor the unit to their specific requirements by adding or removing components as needed. This flexibility is complemented by enhanced safety features, including emergency stop mechanisms and fail-safe operations, which ensure user protection in the event of system malfunctions. Additionally, the A103.A is designed for ease of maintenance, with quick-access panels that facilitate routine checks and service.

Finally, the C075.A model is characterized by its advanced analytics capabilities. With real-time data collection and analysis, this device enables users to optimize processes and predict maintenance needs. The C075.A incorporates state-of-the-art sensor technology, providing accurate monitoring of various parameters, including temperature, pressure, and flow rates. This information can be invaluable for industries that demand precision and compliance with regulatory standards.

In summary, the Weber D082.A, B069.A, A103.A, and C075.A collectively offer a range of advanced features and technologies aimed at improving industrial operations. Their unique characteristics cater to the diverse needs of modern enterprises, emphasizing efficiency, adaptability, and safety across various applications.
Top Page Image Contents