Weber C075.A, B069.A Install Flavorizer Bars and Cooking Grates, Box with the rounded sides up

Page 25

Check:

Install Flavorizer® Bars and Cooking Grates

1)

Hose to manifold connection

You will need: five Flavorizer Bars and two cooking

2)

Manifold to side burner hose connection

grates.

m WARNING: If there is a leak at connection(1),

Place the Flavorizer Bars side by side in the cooking

retighten the fitting with a wrench and recheck for

box.

leaks with soap and water solution.

 

If a leak persists after retightening the fitting, turn

 

OFF the gas. DO NOT OPERATE THE BARBECUE.

 

Contact the Customer Service Representative in

 

your region using the contact information sheet

 

provided with your manual.

 

3)

Side burner hose to side burner connection

 

4)

Valves to manifold connections

 

5)

Hose to quick disconnect connection

 

mWARNING: If there is a leak at connec- tions(2),(3),(4) or(5), turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact the Customer Service Representative in your region using the contact information sheet provided with your manual.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(1)

(2)

Set the cooking grates onto the ledges in the cooking

 

 

box with the rounded sides up.

(3)

 

(4)

 

Installing the Warm-Up™ Basket

 

You will need: Warm-Up Basket

 

Insert one end of the Weber Warm-Up Basket into the

(5)

hole at the right side of the inside of the lid, and the

other end into the slot at the left side of the lid.

C-7

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Gas Grill Liquid Propane GAS Units only Customer Service Center South Hicks Road Palatine, IL WarrantyContents General Instructions Genesis Silver-C NG Page Page Page Page Assemble frame Assemble wheel frameComplete frame assembly Continue frame assemblyAdd front panel Add back panelInsert casters Add cooking box assemblyOmmend That this Installation be Done by a Professional Install Gas Supply General Specifications for PipingGas Line Piping Install igniterTest Connections Check that all burner valves are off Install manifold bracketConnect flexible hose to manifold Install the slide out bottom tray Install Lid Right swing-up work surface Install the right end trim piece with tool holdersBoard Do not use the swing-up work surface as a cuttingYou will need side burner Install side burnerSurface Install the left end trim piece and swing-up workShown, do not push the trim piece in all Way and do not add bolts yetDo not use the work surface as a cutting board Install the work surfaceTime you disconnect and reconnect a gas fitting Check for gas leaksYour barbecue was dealer or store assembled CheckingRetighten the fitting with a wrench and recheck for Install Flavorizer Bars and Cooking GratesSet the cooking grates onto the ledges in the cooking Box with the rounded sides upInstall the thermometer Installing the warming rack Install the bottom shelfTo Extinguish LightingManual Lighting Lighting only the side burner Lighting the Side BurnerCooking CleaningStorage Inspection and Cleaning of the Weber Spider Stopper Guards Annual MaintenanceWeber Spider Stopper Guards General MaintenanceReplacing Main Burners Crossover Ignition System Operations Burners burn with a yellow or Flame is low when burner is onOrange flame, in conjunction with Smell of gasFlame is low in High position Side Burner does not lightFlame is very yellow Conjunction with the smell of gas

C075.A, A103.A, B069.A, D082.A specifications

The Weber D082.A, B069.A, A103.A, and C075.A are part of Weber's distinguished range of high-performance electronic control devices, specifically designed for various industrial and commercial applications. Each model showcases distinctive features and cutting-edge technologies that enhance operational efficiency and reliability.

The Weber D082.A is renowned for its robust build, integrating advanced automation technology. It offers versatile programming options that allow users to customize operation modes based on specific applications. The D082.A supports multiple communication protocols, ensuring seamless integration with existing control systems. It is equipped with a high-resolution display for real-time monitoring and diagnostics, enabling users to make quick adjustments and enhance productivity. The protective design resists environmental challenges, making it suitable for harsh industrial settings.

Next, the B069.A model is designed with an emphasis on energy efficiency. It employs intelligent power management systems to reduce energy consumption while maintaining high output performance. This device is also equipped with advanced fault detection algorithms that quickly identify potential issues, minimizing downtime. Moreover, the B069.A features an intuitive user interface that simplifies configuration and operation, ensuring that even operators with limited technical knowledge can manage the system effectively.

The A103.A highlights its adaptability through modular design, allowing businesses to tailor the unit to their specific requirements by adding or removing components as needed. This flexibility is complemented by enhanced safety features, including emergency stop mechanisms and fail-safe operations, which ensure user protection in the event of system malfunctions. Additionally, the A103.A is designed for ease of maintenance, with quick-access panels that facilitate routine checks and service.

Finally, the C075.A model is characterized by its advanced analytics capabilities. With real-time data collection and analysis, this device enables users to optimize processes and predict maintenance needs. The C075.A incorporates state-of-the-art sensor technology, providing accurate monitoring of various parameters, including temperature, pressure, and flow rates. This information can be invaluable for industries that demand precision and compliance with regulatory standards.

In summary, the Weber D082.A, B069.A, A103.A, and C075.A collectively offer a range of advanced features and technologies aimed at improving industrial operations. Their unique characteristics cater to the diverse needs of modern enterprises, emphasizing efficiency, adaptability, and safety across various applications.
Top Page Image Contents