Weber 5000 Series owner manual Add fuel scale, Install bottom accessory trays, Install igniter

Page 18

Step 16

Add fuel scale

You will need: fuel scale assembly, two 1/4-20 wing nuts and two nylon washers.

Insert indicator rod of fuel scale through the elongated hole in the right end panel. Figure 19 (a).

Slip the bolts on the back of the fuel scale assembly through the two small holes in the right end panel and tank panel. Add washers, then wing nuts and tighten. Figure 19 (b).

(b)

(a)

 

E

 

E

 

F

 

F

View from front left

View from front right

Figure 19

Step 17

Install bottom accessory trays

You will need: two accessory trays

Set the two accessory trays between the two frame connectors. Figure 20.

Figure 20

Step 18

Install igniter

Note - The igniter wires are already attached to the Gas Catcher Ignition Chamber and the igniter. This was done to factory test the ignition system.

The igniter lock nut is on the igniter.

Insert the top of the igniter up through the large part of the keyhole in the frame brace. Figure 21 (b). Loosen the igniter lock nut and slide the igniter into the small part of the keyhole. Figure 21 (c). Tighten the igniter lock nut. Figure 21.

Note - If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers.

(a)

Frame brace

(b)

Igniter lock nut

Keyhole in frame brace

Figure 21

(c)

Frame brace

Small part of keyhole in frame brace

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Genesis 5000 Series LP GAS Units only Warranty Patents and Trademarks Contents Storage For Installation in CanadaGeneral Instructions Operating areaAssembly Check package contentsStep Page Page Check contents of hardware packs Assemble wheels Assemble frameContinue frame assembly Complete frame assemblyCheck the frame assembly Install left end panelInsert casters Install the three back panels Install side burner locksAdd cooking box Install side burner Install manifold bracketInstall tank panel assembly Install right end panelInstall bottom accessory trays Install igniterAdd fuel scale Install left hand swing table Check that all burner valves are offInstall right hand swing table Hinge rod View from rear of barbecue Set LP fuel scale Fill LP tankConnect LP tank Check for gas leaks Insert Flavorizer Bars Steam-N-Chips Smoker Install cooking grates Install the bottom trayInstall the lid Install glass doors Secure side burnerComplete accessory installation Lighting To ExtinguishManual Lighting Side burner will only operate when the Front burner is lit Lighting the side burnerStorage and/or Nonuse Periodic CleaningCooking Storage and/or NonuseUsing the Steam-N-Chips Smoker To use the Steam-N-Chips SmokerRefilling the LP tank Removal of the LP tankEngaged Safe handling tips for LP Gas Liquid Propane LP TanksAnnual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsWeber Spider Stopper Guards General MaintenanceMain Burner Cleaning Procedure Main Burner Flame PatternView from behind cooking box Wing nuts Crossover Ignition System Operations FlameCheck Safety System Burner flame pattern is erratic. Flame is low When burner is on HIGH. Flames do not runBurner does not light, or flame is low in High position Resembles paint peelingProblem Check Cure Side burner does not light Side Burner TroubleshootingSide Burner Maintenance Flame is low in High positionPage 19-20 22-24 Parts List Final Word Thanks

5000 Series specifications

The Weber 5000 Series is a flagship line of outdoor grills that has garnered attention among barbecue enthusiasts and culinary professionals alike. Known for their superior engineering and innovative technologies, these grills are designed to deliver an exceptional grilling experience combined with robust functionality.

One standout feature of the Weber 5000 Series is its exceptional heat retention and distribution system. With a powerful gas cooking system, users can expect consistent temperatures across the grilling surface, ensuring that food is cooked evenly. This is achieved through high-performance burners that provide efficient heat output while minimizing fuel consumption, making it an eco-friendly choice as well.

The series is equipped with Weber's signature Flavorizer bars, which are designed to vaporize drippings and infuse the food with a rich, smoky flavor. These bars are strategically placed above the burners to catch and recycle fat and juices, allowing for a flavor-enhancing experience that is beloved by grillers. The series also features premium cooking grates made from stainless steel, which are not only durable but also provide great heat retention for the perfect sear.

Another highlight of the Weber 5000 Series is its integrated technology, including the iGrill app connectivity. This feature allows users to monitor their cooking progress via a smartphone, providing alerts when the food reaches the desired temperature. This smart technology takes the guesswork out of grilling, making it easier for anyone to achieve restaurant-quality results.

In terms of design, the Weber 5000 Series boasts a sleek and modern aesthetic, with options for various finishes that will complement any outdoor space. It includes a spacious cooking area, making it viable for both intimate family dinners and larger gatherings. Additional features such as side burners and built-in storage enhance the cooking experience and provide added convenience for outdoor meal preparation.

The Weber 5000 Series is built to last, constructed with weather-resistant materials to withstand the elements. This durability ensures that users can enjoy years of dependable grilling, making it a worthwhile investment for outdoor cooking enthusiasts.

Overall, the Weber 5000 Series stands out in the market for its combination of high-performance features, innovative technology, and thoughtful design. It is an excellent choice for those who appreciate quality grilling and are looking to elevate their outdoor cooking experience.
Top Page Image Contents