Side Burner Troubleshooting
Problem | Check | Cure |
Side Burner does not light. | Is gas supply off? | Turn supply on. |
Flame is low in HIGH position.
Is the fuel hose bent or kinked?
Straighten hose.
Push button ignition does not work.
Does burner light with a match?
If match lights burner, checkigniter (see below).
Side Burner maintenance
WARNING: All gas controls and supply valves should be in the OFF position.
(1)
(2)
1)Igniter Wire
2)Venturi/Burner
3)1/8 to 3/16 inch gap between electrode and burner
(3)
Make sure wire is connected between igniter and |
|
electrode. Check that igniter lock nut is tight. |
|
Note: If the igniter works loose, carefully tighten the |
|
igniter lock nut with an adjustable wrench or pliers. |
|
Adjust igniter electrode to burner. Gap should be 1/8 to |
|
3/16 inch from tip of electrode to burner. Spark should | Side Burner Grate |
be a white/blue color, not yellow. | |
| Side Burner Cap |
Side Burner Ring & Head
Igniter Electrode
Control Knob