Weber 41061 Replacing Burner Tube, Ignition System Operations Q100, Replace Battery if Necessary

Page 9

MAINTENANCE

REPLACING BURNER TUBE

x

1) Your Weber® Qgrill must be OFF and cool.

2) Unscrew and remove propane cylinder from the valve/regulator assembly.

3) Open the lid.

4) Remove cooking grate.

5) Remove the 1/4 x 20 inch screw that holds the burner tube to the cookbox (x).

6) Carefully slide the burner tube out from the cook box.

Caution: The burner opening (1) must be positioned properly over the valve orifices (2).

7) To reinstall the burner, reverse 5) through 7).

 

 

2

 

 

1

IGNITION SYSTEM OPERATIONS (Q100, 200)

 

If the ignition system fails to ignite the burner, light the burner with a match. If the burner

 

lights with a match, then check the ignition system.

 

Check that both the white(1) and black(2) ignition wires are attached properly.

 

Check that the ignition button pushes the igniter (button) down, and returns to the

 

 

up position.

 

If the ignition system still fails to light, Contact the Customer Service

1

Representative in your area using the contact information on our web site.

 

Log onto www.weber.com®.

 

 

 

2

ELECTRONIC IGNITION SYSTEM OPERATIONS (Q120, 220)

If the electronic ignition system fails to ignite the burner, light the burner with a match. If the burner lights with a match, then check the Electronic Ignition System.

Check that both of the ignition wires are attached properly to the igniter electrodes on the ignition module. Black wire to electrode (1), white wire to electrode (2).

Check that the Electronic Ignition Button is working by listening and looking for sparks at the burner.

REPLACE BATTERY IF NECESSARY

AAA alkaline battery only. See illustration:

If the Electronic Ignition System still fails to light, contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.

2

1

WWW.WEBER.COM® 9

Image 9
Contents LP GAS Grill OWNER’S Guide General Instructions USA WARRANTY, GARANTÍA, GarantieASSEMBLY, ENSAMBLAJE, Assemblage Parts LIST, Lista DE PIEZAS, Liste DES PiécesCleaning Storage AND/OR NonuseOperating Cooking GAS Instructions Attach Propane CylinderCheck for GAS Leaks Lighting OperatingManual Lighting To ExtinguishAnnual Maintenance MaintenanceMain Burner Cleaning Procedure Main Burner Flame PatternReplacing Burner Tube Replace Battery if NecessaryIgnition System Operations Q100 Electronic Ignition System Operations Q120Problem Check Cure TroubleshootingPage Registre su asador en línea visitando Advertencias Peligros Y ADVertERTENCIASAlmacenamiento O Desuso Instrucciones GeneralesOperación CocciónConexión DEL Cilindro DE GAS Propano Instrucciones Sobre EL GASPeligro Verificación DE Fugas DE GASEncendido Instrucciones DE OperaciónEncendido Manual Para ExtinguirMantenimiento Anual MantenimientoMolde Principal DEL Quemador DE Llama Procedimiento DE Limpieza DEL Quemador PrincipalOperaciones DEL Sistema DE Encendido Q100 Reemplazo DEL Tubo DEL QuemadorOperaciones DEL Sistema DE Encendido Electrónico Q120 Reemplace LA Batería SI Fuese NecesarioProblema Comprobar Solución Resolución DE ProblemasPage Guide de L’utilisateur Barbecue au Propane Avertissements Entreposage ET NON-UTILISATION Consignes GénéralesUtilisation CuissonConsignes Pour LE GAS Fixation DE LA Bouteille DE PropaneDétection DES Fuites DE GAZ Utilisation AllumageAllumage Manuel Maintenence Configuration DE Flamme DES Brûleurs PrincipauxEntretien Annuel Procédure DE Nettoyage DES Brûleurs PrincipauxFonctionnement DU Système D’ALLUMAGE Q100 Remplacement DE Tube DE BrûleurUtilisation DU Systeme D’ALLUMAGE Electronique Q120 Remplacez LA Pile SI NecessaireProblème Vérification Cure DépannagePage Page Page WEBER-STEPHEN Products CO
Related manuals
Manual 32 pages 31.26 Kb