Side Burner Troubleshooting
Problem | Check | Cure |
Side Burner does not light. | Is gas supply off? | Turn supply on. |
Flame is low in HIGH position.
Is the fuel hose bent or kinked?
Straighten hose.
Push button ignition does not work.
Does burner light with a match?
If match lights burner, checkigniter (see below).
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your region using the contact information sheet provided with your manual.
Side Burner maintenance
WARNING: All gas controls and supply valves should be in the OFF position.
Make sure wire is connected between the igniter and electrode. Adjust igniter electrode to burner. Gap should be 1/8 to 3/16 inch from tip of electrode to burner. Spark should be a white/blue color, not yellow.
1)Igniter Wire
2)Venturi/Burner
3)1/8 to 3/16 inch gap between electrode and burner
(3)
(1)
(2)
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob