Step 13
Install side burner
You will need: side burner assembly, burner grate, and manifold bracket.
mWARNING: Make sure gas supply is OFF.
Slide the side burner assembly into the open end of the right frame. Route the side burner hose around the tank panel so it will not interfere with scale indicator rod.
The side burner hose is connected in the following manner:
Slide back the collar of the quick disconnect on the manifold. Push the male fitting of the side burner hose into the quick disconnect, and maintain pressure. Slide the collar closed. Figure 14a. Figure 14b shows the quick disconnect engaged.
Install burner grate. Check to be sure the side burner valve is OFF. Push side burner control knob down and turn clockwise. Figure 14.
Step 14
Install manifold bracket
You will need: manifold bracket
Hook the bracket onto the manifold at the center burner valve. Figure 15. Place your hand underneath the bracket. Lift the bracket, manifold and cooking box slightly as a unit and hook onto the frame brace.
Manifold bracket
Frame brace
Figure 15
Figure 14
Male fitting
of side burner
a)
Manifold side view
Quick disconnect
engaged
b)
Side burner hose | Manifold side view |
|
15