Weber 3000 owner manual Ber E W Reb

Page 8

Control panel

Right frame

Front panel

Caster frame

Left frame

Two casters

Wheel frame

Two cooking grates

Two frame connectors

Warming rack

Tank panel assembly

Warm-Up Basket

Five long Flavorizer Bars

Thermometer

Eight short Flavorizer Bars

Left hand slide bar assembly

Two wheels

BER E W

W E REB

Assembly consists of:

Left hand slide bar

Two aluminum drip pans

Support

Catch pan

Slide

Axle

8

Image 8

Contents Genesis 3000 Series MDANGER MWARNINGS LP GAS Units onlyWarranty Patents and Trademarks Contents For Installation in Canada General InstructionsStorage Operating areaStep AssemblyCheck package contents BER E W REB Check contents of hardware packs Assemble wheels Assemble frameInsert casters Continue frame assemblyComplete frame assembly Install side burner locks Add cooking boxInstall tank panel assembly Add fuel scaleInstall igniter Check that all burner valves are offMWARNING Make sure gas supply is OFF Install side burnerInstall manifold bracket Fill LP tank MCAUTION Do not remove adjustment wing nut from tank scaleSet LP fuel scale Connect LP tank Check for gas leaks MWARNING Do not ignite burners while leak checkingInstall Flavorizer Bars and Cooking Grates Install the bottom trayInstall the lid Install tool holders, control panel and burner control knobsMCAUTION Make sure both locks have snapped into place Install swing tableSecure side burner Notch to the front Slide bar View from front of barbecue Complete accessory installation Lighting To ExtinguishManual Lighting Lighting the side burner Lighting only the side burner. FigurePeriodic Cleaning CookingStorage and/or Nonuse Storage and/or NonuseRemoval of the LP tank Connecting the filled LP tankRefilling the LP tank Male fitting Regulator Collar Quick disconnect engaged Date Tested Safe handling tips for LP GasLiquid Propane LP Tanks Annual Maintenance Inspection and Cleaning of the Weber Spider Stopper GuardsGeneral Maintenance MCAUTION Do not enlarge the burner ports when cleaningWeber Spider Stopper Guards Main Burner Flame PatternTo reinstall burners, reverse steps c through g Crossover Ignition System Operations When burner is on HIGH. Flames do not run Burner does not light, or flame is low in High positionMCAUTION Do not line the bottom tray with aluminum foil Burner flame pattern is erratic. Flame is lowSide Burner Troubleshooting Side Burner MaintenancePage 14-15 17-18 21-22 26 27 Parts List Final Word Thanks