Jenn-Air 720-0511 Placement Of The Grill, Insect Warning, CLEARANCE Non-Combustible Construction

Page 7
 INSECT WARNING

SAFETY INSTRUCTIONS

When using the grill, do not touch the grill rack, burner grate or immediate surroundings as these areas become extremely hot and could cause burns. Use only dry potholders. Moist or damp potholders on hot surfaces may cause steam burns. Do not use a towel or bulky cloth in place of potholders. Do not allow potholders to touch hot portions of the grill rack.

Grease is flammable. Let hot grease cool before attempting to handle it. Do not allow grease deposits to collect in the grease tray at the bottom of the grill’s firebox. Clean the grease tray often.

Do not use aluminum foil to line the grill racks or grill bottom. This can severely upset combustion air flow or trap excessive heat in the control area.

For proper lighting and performance of the burners, keep the burner ports clean. It is necessary to clean them periodically for optimum performance. The burners will only operate in one position and must be mounted correctly for safe operation.

Clean the grill with caution. To avoid steam burns, do not use a wet sponge or cloth to clean the grill while it is hot. Some cleaners produce noxious fumes or can ignite if applied to a hot surface.

PLACEMENT OF THE GRILL INSECT WARNING

Spiders and other insects can nest inside the burners of this and other grills, which could disrupt gas flow. This dangerous condition could cause a fire behind and beneath the valve panel, damaging the grill and making it unsafe for operation.

Inspect the grill at least twice a year.

Never use a dented or rusty propane cylinder.

Turn off all control knobs and make certain the grill is cool before using any type of aerosol cleaner on or around it. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal parts to corrode.

Do not use the grill to cook excessively fatty meats or other products that promote flare-ups.

Do not operate the grill under unprotected combustible constructions. Use only in well- ventilated areas. Do not use in buildings, garages, sheds, breezeways or other such enclosed areas.

This unit is intended for outdoor use only.

Keep the areas surrounding the grill free from combustible materials including, fluids, trash, and vapors such as gasoline or charcoal lighter fluid. Do not obstruct the flow of combustion and ventilation air. If the unit is stored indoors, make sure it is cool.

Do not use briquettes of any kind in the grill.

The 720-0511 liquid propane gas grill is designed for optimum performance without the use of briquettes. Do not place briquettes on the flame tamers, as this will block the vent to the grill burners. Adding briquettes can damage ignition components, thus voiding the warranty.

Keep the back of the cart free and clear from debris. Keep electrical supply cords and the rotisserie motor cord away from heated areas of the grill.

Never use the grill in extremely windy conditions. If located in a consistently windy area (oceanfront, mountaintop, etc.), a windbreak will be required. Always adhere to the clearance specifications.

PLACEMENT OF THE GRILL

CLEARANCE

Non-Combustible Construction

A minimum of 24 inches clearance from the back of the grill to non-combustible materials are required for the lid to open fully.

CLEARANCE WARNING

Do not install this unit into combustible enclosures. There should be a minimum clearance of 24 inches from all sides to combustible materials.

LOCATION

When determining a suitable location take into account concerns such as exposure to wind, proximity to traffic paths, and keeping gas supply lines as short as possible.

Place the grill in well-ventilated areas. Never place the grill in a building, garage, breezeway, shed or other such enclosed areas. During heavy use, the grill will produce a lot of smoke.

5

Image 7
Contents G18Y07P-02 TABLE OF CONTENTS SAFETY INSTRUCTIONS RECOGNIZED SAFETY SYMBOLS, WORDS AND LABELS SAFETY INSTRUCTIONS ROTISSERIE DRIVE MOTOR USING THE SIDE BURNERBEFORE LIGHTING LP GAS CYLINDER WARNINGCALIFORNIA PROPOSITION 65-WARNING SAFETY PRACTICES TO AVOID INJURYTESTED IN ACCORDANCE WITH ANSI Z21.58 - 2007 LATEST STANDARD and CSA LOCATION PLACEMENT OF THE GRILLINSECT WARNING CLEARANCE Non-Combustible ConstructionSIDE SHELF ASSEMBLY BATTERY INSTALLATION SIDE SHELF HANDLE ASSEMBLYRetention Screw BRAKING SYSTEM OPERATIONSLIQUID PROPANE CYLINDER RETENTION SYSTEM 1. Push to the right to lock 2. Push to the left to unlockPROPANE REGULATOR HOOK-UP SLIDE-OUT TRAY LOCKING SYSTEMDISCONNECTION GAS HOOK-UPLIQUID PROPANE CYLINDER REQUIREMENTS 20 lb. Cylinder CONNECTIONTO TEST LEAK TESTINGBEFORE TESTING GENERALINSTALLER FINAL CHECK THE ROTISSERIE SKEWER USING THE GRILLUSING THE ROTISSERIE BURNER OPERATING INSTRUCTIONSTO LIGHT THE GRILL BURNER FLAME CHARACTERISTICSLIGHTING INSTRUCTIONS BEFORE LIGHTING…ROTISSERIE BURNER & SEARING LIGHTING ILLUSTRATIONSMAIN BURNER LIGHTING SIDE BURNER LIGHTINGMain Burner TO MATCH LIGHT THE GRILLSear Burner Rotisserie Burner GRILL LIGHTS Bulb ReplacementLight Operation Instruction Bulb Specification Cleaning MethodLIGHTING INSTRUCTIONS USING THE SIDE BURNERCARE & MAINTENANCE OF SIDE BURNER BURNER CLEANINGGRILL BURNERS CARE & MAINTENANCE OF THE GRILLGRILL BURNER CLEANING GREASE TRAY CLEANINGPROBLEMS TROUBLESHOOTINGWHEN TO LOOK FOR SPIDERS BEFORE CALLING FOR SERVICE4748 EXPLODED VIEWA01 CathyZhang 090507 /A00 CathyZhang 78 77DESCRIPTION PARTS LIST720-0511 DESCRIPTIONA01 CathyZhang 090507 /A00 CathyZhang FOOD GRILL COOKING CHARTWEIGHT OR GRILLING HINTSOR THICKNESS WEIGHTAPPROXIMATE TANGY SEAFOOD KABOBS GRILL RECIPESBBQ SALMON BAKED CHILI CORNSPARE RIBS BEEF AND LAMB KABOBSEGGPLANT CAVIAR 1 large eggplant CHICKEN TANDOORI STYLEComponent LIMITED WARRANTY MODEL #720-0511 STAINLESS STEEL OUTDOOR GAS GRILLWarranty Period WARRANTY CLAIM PROCEDURE